HP DeskJet 3632 Printer Factory Reset Instructions

If your HP 3632 series printer ever behaves strangely, do a factory reset.  Reset also to update its WiFi settings.  Furthermore, a factory reset restores the 3632 to factory default settings.  Once the reset ends, you can set the printer up anew.  E.g. You can enter new printer settings, to reconnect it to a WiFi network, or to a new network. Thus in this demo, we demo the HP DeskJet 3632 printer factory reset instructions.

HP DeskJet 3632 Printer Factory Reset Instructions: Step by Step

1. Turn Printer On

First, press and quickly release the Power button.

Find the Power button as shown on the printer, by the pink arrow in the next photo.

2. Wait for Printer to Finish Starting Up

Secondly, power up finishes when all printer noise stops, and the Power button glows steady white after the printer  boots.

3. Next, Press and Hold the Power Button

But don’t release it though, until you run the next two steps.

4. Then, Quickly Press and Release the Start Copy Black Button Twice

Then, while holding in the Power button, also press and release Start Copy.

The next picture shows where this button is on the printer.  The pink arrow points out the Copy button.

5. Next, Press and Release the Cancel (Red X) Button Three Times

See where it is in the next picture.

6. Wait for WiFi Network Status Light to Blink White

Find the light as shown in the next picture.

Finally, when it blinks, the printer deletes the old information from its memory. Then, the printer is ready for programming with new wireless network details.

7. Done !

Lastly, set up your HP 3632 printer.  Indeed, it’s back to its factory default (brand new) settings.

Other HP DeskJet 3632 Printer Posts

1. 1. How to Install HP DeskJet 3632 Printer
   2. How to Connect HP DeskJet 3632 Printer to WiFi
   3. HP DeskJet 3632 Printer Setup

References for HP DeskJet 3632 Printer Factory Reset Instructions

1. 1. Where to Buy the HP DeskJet 3632 Printer