This post gives JBL Charge 3 Bluetooth pairing instructions, for source devices like the iPhone, iPod Touch, and the iPad line of Apple phones and tablets. A similar routine also works for Android phones and tablets.
JBL Charge 3 Bluetooth Pairing Instructions
With your JBL Charge 3 powered off (power button is dark), run through this routine to pair it to your mobile device. We’re using an iPad Air tablet in this demo.
1. Find your Way to the Home Screen on your Tablet or Phone
Press the Home button to uncover the mobile iOS device’s Home screen.
2. Find the Settings App
We found ours on the second page of our Home screen.
3. Bring up the Settings App
Tap the Settings app icon.
The source device then displays the first page of its settings, as shown in the next step.
4. Go to Bluetooth Settings to Continue with JBL Charge 3 Bluetooth Pairing
Our Bluetooth Settings screen displays as follows. Note that our Bluetooth is enabled here. But since JBL Charge 3 speaker is currently powered OFF, it does not show up in the Bluetooth Devices list. Also, we don’t see it since we’ve never paired this speaker with this iPad Air before. See this as shown in this list of previously paired Bluetooth devices, shown next.
5. Turn On your JBL Charge 3 Bluetooth Speaker
Turn on the JBL Charge 3 by quickly pressing its Power button. See this pointed at by the green arrow in the next picture.
The speaker then powers up.
But since our iPad does not know about this speaker, it will not pair with the JBL Charge 3 automatically. The light that comes on in the Power switch denotes this not-paired state by glowing solid white, as shown next.
6. Put your JBL Speaker into Discovery Mode
Now, to see your JBL Charge 3 on your source BT device, place the speaker into Bluetooth pairing mode. To do that, press and release the Pairing button, as shown in the next picture.
When you press the Bluetooth Discovery Mode button, the speaker makes a repeating single pluck guitar note sound several times. Also, the power button changes from a solid white glow to flashing blue. See this next.
7. Find your JBL Charge 3 on your iOS iPad, iPod, or iPhone Device
See the screen shot next. We found our Bluetooth speaker, as pointed at by the blue arrow, as shown next.
8. Pair with your JBL Charge 3 Portable Speaker
Tap the listed speaker in the Other Devices section of the Bluetooth devices list, shown above.
Your iOS device then pairs with the Charge 3 (“JBL Charge 3” in this demo). The iOS device’s Bluetooth Settings screen then changes to look something like the following.
Note that the JBL Charge 3 now shows as connected, as pointed at by the Blue arrows in the last picture.
9. Done with JBL Charge 3 Bluetooth Pairing !
We have now successfully paired our JBL Charge 3 portable speaker with our iPad iOS device. This procedure also works when pairing with Apple iPhone and iPod devices, although the screen faces may differ slightly on the iPhone.
Related Posts to JBL Charge 3 Bluetooth Pairing
Other Posts About the JBL Charge 3 Power Bank BT Speaker
References for JBL Charge 3 Bluetooth Pairing
Revision History
-
- 2022-12-02: Updated links.
- 2020-07-30: First published.