JBL Charge 5 Bass Boost

Unfortunately, the usual way of how to turn on bass boost on the JBL Charge 5 does not work. Further, we know of no other way to activate this mode. But you could simulate it by adjusting an equalizer app on your streaming source device. Hopefully, JBL will add this feature in a later version of the firmware.

But if this did work, it might operate as follows, just as it has on other JBL Charge models.

Now when ON, this mode would make the passive bass radiators vibrate noticeably more.  Moreover, extra bass mode would add a decidedly “thumpy” aspect to the content playing. This could make the 5 sound much bigger than it really is.

JBL Charge 5 Bass Boost: Step by Step

First off, by default, the 5 would have this super bass mode turned on.  Moreover, if this toggling actually worked, then it would also add more treble as well as extra bass as well.

JBL Charge 5 Bass Boost: How to Switch ON

Some day, we hope that you’ll be able to turn this extra bass mode ON. It would go as follows. Press the Volume Down (-) and Bluetooth buttons for about ten seconds.  You would release them when the oval ring lights up.

Also, to reverse what you did above, then again, you would press the Volume Down and Bluetooth buttons. Hold them in until the oval button ring lights up once more.  Then release them.  Finally, when the ring goes dark, bass mode would go back to what it was before.

Qualifiers

1. 1. Speaker firmware version for this test: 0.5.2.0.

Other Posts About the JBL Charge 5

1. 1. How to Put This Speaker in Pairing Mode
   2. How to Reset
   3. JBL Charge 5 Won’t Turn On Problem
   4. Low Frequency Mode Explained
   5. Buttons, Codes, Combinations, Meanings

References

1. 1. JBL Charge 5 Product Page
   2. Where to Buy the JBL Charge 5