JBL Charge 5 BT speaker, front left view.
Unfortunately, the usual way to activate the JBL Charge 5 speaker extra bass mode does not work. Further, we know of no other way to switch this mode ON. But you could simulate it by adjusting an equalizer app on your streaming source device. Hopefully, JBL will add this feature in a later version of the firmware.
But if this did work, it might operate as follows, just as it has on other JBL Charge speakers.
Now when ON, this mode would make the passive bass radiators vibrate noticeably more. Moreover, extra bass mode would add a decidedly “thumpy” aspect to the content playing. This could make the 5 sound much bigger than it really is.
First off, by default, this speaker would have this extra bass mode turned on. Moreover, if this toggling actually worked, then it would also add more treble as well as extra bass as well.
Someday we hope that you’ll be able to turn this extra bass mode ON. It would work by pressing the Volume Down (-) and Bluetooth buttons. Then hold them in for about ten seconds. Finally you would release them when the oval ring lights up.
Find these buttons on the top of the speaker.
Also, to reverse what you did above, then again, you would press the Volume Down and Bluetooth buttons. Hold them in until the oval button ring lights up once more. Then release. Finally, when the ring goes dark, extra bass mode would go back to what it was before.
Shows how to connect HP DeskJet 3630 series to WiFi. Note that doing this will…
Here, we show how to reset the Wonderboom speaker version 2. which returns it to…
We give here the JBL Clip reset directions, that return it to its default settings…
The JBL Boom Box JBL by Harman Kardon is a moderate to higher power, boom…
The JBL Boombox 1 speaker by Harman Kardon is a moderate to higher power, boom…
The JBL Boombox speaker by Harman Kardon is a moderate to higher power, boom box…