JBL Charge 5 Speaker Low Frequency Mode

Unfortunately, the usual way to switch low frequency mode does not work on the JBL Charge 5 speaker. Hopefully, JBL will re add this feature in a later version of the firmware.  But if this did work, it might work as it has on other JBL Charge speakers.  Now when ON, this mode makes the passive bass radiators vibrate noticeably more.  Furthermore, low frequency mode adds a decidedly “thumpy” aspect to the content playing. And this would make the 5 sound much bigger than it really is.

How to Toggle JBL Charge 5 Speaker Low Frequency Mode

First off, by default, the 5 has this extra bass mode turned on.  Moreover, if this toggling actually worked, this would also add more treble and lots more bass.

How to Switch OFF and ON

Someday we hope that you’ll be able to turn low frequency mode OFF. This would work by pressing the Volume Down (-) and Bluetooth buttons. You would hold them in for about ten seconds.  Hold until the oval ring around the buttons lights.

Also, to turn extra bass mode back on, again, press the Volume Down and Bluetooth buttons. Hold them in until the oval button ring lights up again.  Then release the buttons.  Finally, when the ring goes off, low frequency mode resumes once more.

Qualifiers

1. 1. Speaker firmware version for this test: 0.5.2.0.

Other JBL Charge 5 Speaker Posts

1. 1. Charging Time
   2. How to Charge
   3. Speaker Watts
   4. Fixing the Not Charging Problem
   5. The Battery Life Explained

References for JBL Charge 5 Speaker Low Frequency Mode

1. 1. Official JBL Charge 5 Speaker Product Page
   2. Where to Buy the JBL Charge 5 Speaker