The blue status light on the front of the JBL Clip speaker.
The JBL Clip 1 has a single LED on its front grill, near the clip carabiner. This displays battery status. It shows whether it’s draining or charging, or whether it’s critically low. However, it does not show charging progress, or how full the battery is. But it does change color when the battery reaches almost-dead state. So in this post, we describe how to read the JBL Clip 1 Charging Indicator light.
When you power down the Clip 1 with no charger present, this lamp goes dark. The lamp is also dark when the charger IS present, but the battery is full.
The status lamp lights up red (no flashing) while the speaker charges, as shown in the next picture. On this speaker, the glowing light is the only visual indication that charging is underway. But it does not tell how far along the charging is.
Note that this lamp blinks purple and blue when the battery is very low. So this signals that you should recharge the Flip soon. Then when you connect a charger, this red flashing light turns to a solid red when the speaker is OFF. Or it turns purple when the Clip 1 is ON. Also note that this light never flashes while charging is happening.
As speaker charging continues, the light keeps glowing red or purple. Battery charging completes when the lamp goes out, or turns blue. It turn off when the speaker is not ON, and turns white when it is ON.
This last picture shows the speaker during charge cycle when turned OFF. Note the red light.
The next picture shows the speaker charging while turned on. Note the purple light.
The recharge cycle finishes when the lamp turns off. Even with the AC charger present, the lamp does not glow when battery is full. Of course that is the case unless the speaker itself is running.
If the speaker is ON when charging finishes, the lamp turns from purple to blue. If the speaker is OFF, then then lamp goes from red to dark.
When unplugged from the charger, what was the Charging Indicator becomes the battery charge left indicator. Well sort of. If it glows or flashes blue, then the battery has some amount of play time remaining. But you cannot tell precisely how much by reading this light.
But the only indication this light gives about battery status when not charging, is when the battery is quite low. Then, this lamp starts flashing purple and blue.
Unfortunately, the Portable app does not communicate with this speaker. So you cannot read its Charging Indicator there.
The JBL Go 2 speaker by Harman Kardon is a low power, hand-held style unit…
Shows how to fix Honeywell wireless thermostat connection failure issues. You might see these on…
Shows how to connect HP DeskJet 3630 series to WiFi. Note that doing this will…
Here, we show how to reset the Wonderboom speaker version 2. which returns it to…
We give here the JBL Clip reset directions, that return it to its default settings…
The JBL Boom Box JBL by Harman Kardon is a moderate to higher power, boom…