JBL Extreme 2 Charger Specs

JBL Extreme 2 charger, back view, showing its specs.

The JBL Extreme 2 Bluetooth speaker comes with an AC charger cord, detailed here. Furthermore, this charger fully recharges the speaker’s built in power bank in roughly four hours. Then, the Extreme 2 plays for up to fifteen hours at average volume levels before needing another charge. So here, we give the JBL Extreme 2 charger cord specs.

Firstly, the JBL Extreme 2 charger is black in color, as shown next. Plus, it has one barrel type DC power output plug. Finally, a detachable AC power cable connects the power converter box to a standard wall outlet.

JBL Extreme 2 charger cord adapter.

JBL Extreme 2 Charger Specs

Model Number: NDT19V-3C-DC. Input: 100-240 volts, 50-60 Hertz, 1.5 Amps Max. Further, the output is 19 volts DC, 3 amps Max. Positive center on the DC output plug. Made in China. I.T.E Power Supply. Group Intellect Power Technology Limited. Conforms to UL STD. 60950-1. Certified to CSA STD. C22.2 No. 60950-1-07.

JBL Extreme 2 charger, back, close up view , showing its specs.

About the Attached Cables

The JBL Extreme 2 charger comes in two pieces. First, we have the DC cable. This permanently attaches to the charger box. Then there is the AC “cheater” style cord that plugs into the this box.

The AC Cord Part of the JBL Extreme 2 Charger

Next, we show the AC input plug on that box. This is a pretty standard, non polarized AC cord. So that means that you can insert the cord here either way. Furthermore, the standard 110 volt AC plug on the other end of the cable has no polarity.

JBL Extreme 2 charger, showing its AC input port.

Additionally, the power supply end is about five eights of an inch long and a quarter inch wide.

The charger AC cheater cord, appliance end plug, laying against a ruler.

Also, the plug on the other end of the cord has no polarity.

Next, we move on to the other connector in this power adapter.