JBL Flip 4 Pairing

This post offers JBL Flip 4 pairing instructions that apply mainly to iOS devices, such as the iPhone, iPod Touch, and the iPad Air line of Apple phones and tablets. But slight variations of these also work when pairing the 4 with Android devices.

JBL Flip 4 Pairing: Step by Step

With your JBL Flip 4 powered off (power button is dark), run through this routine to pair it to your iPad, iPhone, or iPod Touch iOS mobile device.  We’re using an iPad Air tablet for this demo.

1. Bring Up the Home Screen on your Source Tablet or Phone

Press the   Home   button to reveal the mobile iOS device’s   Home  screen.

2. Find the  Settings App

We found ours on the second page of the iOS home screen on our iPad Air, as shown next.

3. Bring up the   Settings   App

Tap the Settings app icon.

The iPad then displays the first page of its settings, as shown in the next step.

4. Go to  Bluetooth Settings to Continue with JBL Flip 4 Pairing

Our Bluetooth settings screen displays as follows. Note that our Bluetooth is enabled here. But since JBL Flip 4 is currently powered down, it does not show up in the Other Devices list. Also, we don’t see it in the My Devices list since we’ve never paired our speaker with this iPad before.  See this as shown in this list of previously paired devices, shown next.

5. Turn On your JBL Flip 4

Turn on the 4 by quickly pressing its   Power   button. See this circled in green, in the next picture.

The unit then powers up.

But since our iPad does not know about this speaker, the Flip 4 JBL will not pair with it automatically. The light that comes on in the Power switch denotes this not-paired state by glowing solid white, as shown next.

6. Put the 4 into Discovery Mode

Now, to see your JBL Flip 4 on your iOS device, place the speaker into discovery mode. To do that, press and release the Pairing button, as shown in the next picture.

When you press this Pairing Mode button, the speaker makes a repeating single pluck guitar note sound several times. Also, the Power button changes from a solid white glow to flashing blue. See this next.

7. Find your JBL Flip 4 on your Source Device to Continue with JBL Flip 4 Pairing

See the screen shot next. We found our speaker, as pointed at by the purple arrow.

8. Pair with your JBL Flip 4

Tap the listed speaker in the  Other Devices  section of the devices list.

Our iOS device then pairs with the JBL Flip 4 (“Tom’s Flip 4” in this demo).

Our iOS device’s Bluetooth Settings screen then changes to look something like the following.

9. Done with JBL Flip 4 Pairing !

At last we have now successfully paired our JBL Flip 4 with our iPad iOS device.

Other Posts About the JBL Flip 4

References for JBL Flip 4 Pairing

1. 1. JBL Flip 4 Official Product Page
   2. Where to Buy the JBL Flip 4