The top front view of the JBL Flip 6 speaker.
Unfortunately, turning ON and OFF the extra bass mode on the JBL Flip 6 does not work. Hopefully, JBL will add this feature back on in a later version of the firmware.
But if this did work, it might function as follows, just as it has on other JBL Flip speakers. Now when ON, this mode makes the passive bass radiators vibrate more. Furthermore, extra bass mode adds a “thumpy” aspect to the content playing. And which makes this speaker sound much bigger than it really is.
First off, by default, this BT speaker has this extra bass mode ON. So you already get more treble and lots of extra bass to the audio output. You just can’t turn it OFF.
Some day, we hope that you’ll be able to turn extra bass mode OFF. This would work by pressing the Volume Down (-) and Bluetooth buttons. Then you would hold them in for about ten seconds, or until the oval ring lights up. Find these buttons on the top of the speaker.
Also, to turn extra bass mode back on, again, press the Volume Down and Bluetooth buttons. Then hold them in until the oval button ring lights up again. Then release them. Finally, when the ring goes off, extra bass mode is in effect once more.
We've brewed several tens of pots of coffee in our Farberware automatic coffee maker. We've…
We've brewed several tens of pots of coffee in our Farberware automatic coffee pot. We've…
Why would you need to perform Honeywell RTH8580WF WiFi setup for this common thermostat ? …
Gives a safe routine to defrost a freezer fast with a heat gun. now a…
You can charge the JBL Clip 3 conveniently via the hidden USB charge port. Here,…
The Charge 3 JBL comes with an AC charger adapter, whose specs , type, and…