JBL Flip 6 Speaker Pairing

This post gives a JBL Flip 6 speaker pairing routine. This works when pairing with the iPhone, iPod Touch, and the iPad line of Apple phones, media players, and tablets. However, a similar procedure applies to Android devices too.

JBL Flip 6 Speaker Pairing: Step by Step

With your speaker OFF, run through this routine to pair it to your mobile device.

We use an iPad Air tablet for this demo.

1. Get to the Home Screen on your Source Device

Firstly, press the Home button to reveal the mobile device’s Home screen.

2. Find the Settings App

We found ours on the second page of the iPadOS home screen on our iPad Air tablet.

3. Bring up the Settings App

Thirdly, tap the Settings app icon.

The device then shows the first page of its Settings page.

4. Go to Bluetooth Settings  to Continue with JBL Flip 6 Speaker Pairing

Our BT settings screen displays as follows. Note that Bluetooth is ON here. But since our speaker is currently OFF So, it cannot be in discovery mode. Thus it does not show up in the   Bluetooth Devices   list. Also, we don’t see it since we’ve never paired it with this tablet before.

 

5. Turn On the Speaker

Then power up the speaker by fast pressing its  Power  button.

The speaker then turns on, and its power lamp lights and the Pairing lamp flashes or glows white.  If blinking, this means that the speaker is ready to receive a connection request.

But since our tablet does not know about this speaker, the speaker will not pair with it automatically.

6. Put your Speaker into Discovery Mode

So to see the 6 on your iOS or iPadOS device, start up discovery mode on it. To do that, press and release the Bluetooth button.

When you press this control, the speaker plays a repeating single pluck guitar note. Also, the status lamp changes to a fast flashing white.

7. Find your Speaker on your Mobile Device to Continue with JBL Flip 6 Speaker Pairing

See the screen shot next.

8. Pair with the Speaker

So tap the speaker entry in the Other Devices section of the devices list.

Your source device then pairs with it.

The tablet’s   Bluetooth Settings  screen then changes to look something like the following.  Note the now-connected JBL Flip 6 entry.

9. Done with JBL Flip 6 Pairing !

Finally, we have now paired our Flip 6 with a tablet.

Other Posts About the JBL Flip 6 Speaker

References for JBL Flip 6 Speaker Pairing

1. 1. JBL Flip 6 Speaker Official Product Page
   2. Where to Buy the JBL Flip 6 Speaker