The red glowing battery indicator on the JBL Flip speaker.
OFF/When the Powerbutton on your JBL Flip speaker is not working, this likely means one or more things as follows.
Dead Battery. The internal battery is empty needs a recharge for continued speaker operation. Use a commercially available USB charger to do this.
Faulty AC Adapter. The power adapter charger is defective. So replace it with a charger that delivers 5 volts, at 1.5 amps.
Faulty Power Port. The micro USB input port for charging the speaker may be damaged, a common problem seen on this speaker. So replace this if you have the necessary skills.
Faulty Battery. That battery no longer recharges due to extreme age, repeatedly overcharging, very long storage without recharging, or heavy use. Replace the battery in this case with one that delivers 7.4 volts at 1.05 amp hours (7.77 watt-hours).
Dirty Buttons Panel. The button panel has sand, dirt, or other debris preventing the Powerbutton from making proper contact when you poke it. For this, you can, if so skilled, clean the switches by disassembling the speaker, and blowing or brushing out the contact area.
The Button Panel Has Failed. The switch panel is defective, and the answer here is to replace it. These parts are often available on eBay.
Faulty Speaker. Your speaker is broken beyond repair. If you determine this, then the best bet is just to get a new speaker.
The Echo Dot 4 smart speaker with clock alongside the JBL Flip Bluetooth speaker.
Related Posts to JBL Flip Power Button Not Working