Picture of the JBL Go 2 Bluetooth speaker, connected via its AUX input to an iPod Touch portable media player.

JBL Go 2 Volume Control Explained

There are a few ways for how to set the volume control on the JBL Go 2 Bluetooth speaker. Furthermore, these depend on the app(s) you’re playing from mostly. Many apps provide volume controls.  Plus, this JBL speaker has two buttons for volume control.  Find these (the + and -) buttons on its top, in the center. Note though, that you cannot set volume with the JBL Connect app on this BT speaker.





How to Change Loudness Using the JBL Go 2 Volume Control

First, you can set the volume control without using any apps as follows.

1. Lay Out the Speaker such that the + and Controls Face You

See the correct speaker position shown next.  There are five buttons in this row, which, again,  we find across the top of the speaker.  We have circled the volume control buttons.

Picture of the JBL Go 2 wireless speaker showing its Volume UP and DOWN buttons circled in green.
JBL Go 2 wireless speaker showing its Volume UP and DOWN buttons circled in green.

2. Work the JBL Go 2 Volume Control by Pressing the and + Buttons

Press the (-) button to cut the volume. Tap the (+) button to make it louder.

3. Done !





How to Set the JBL Go 2 Volume Control with Siri Voice Commands on iOS and iPadOS

Picture of Siri prompting for voice command screen on iOS device.
Siri prompting for voice command screen on iOS device.

Next is an example of giving Siri a voice command to set the volume to half (50 percent).

Picture of Siri changing volume to half (50 percent). Showing the screen when that happens.
Siri changing volume to half (50 percent). Showing the screen when that happens.

Briefly press the Home button to get Siri’s attention.  Then ask her to raise and lower the volume as follows.

Next is an example of Siri responding to a voice command to set the volume to FULL (100 percent).

Screenshot of Siri changing volume to full (100 percent). Showing iOS screen when that happens..
Siri changing volume to full (100 percent). Showing iOS screen when that happens..

Siri currently understands one scale for volume adjustment: 0-100 percent.  Example commands follow.  Say these after you’ve pressed the Play / Pause to wake her up.

  • Set volume 0 [muted].
  • Volume 0.
  • Set volume 10 [Ten percent].
  • Set volume 10 percent.
  • Volume 10.
  • Set volume 76 percent.
  • Volume 76.
  • Set volume 100 [One hundred percent, full volume].

There are also shortcut commands for min and max volume setting, as in:

  • Mute. [Sets the volume to zero percent, minimum, muted state.]
  • Half volume. [Adjusts volume to fifty percent, or half of full.]
  • Set volume full. [Sets speaker volume to maximum, 100 percent.]
  • Set volume max. [Sets speaker volume to maximum, 100 percent.]
  • Volume half. [Adjusts volume to fifty percent, or half of full.]
  • Volume minimum. [Sets the volume to zero percent, minimum, muted state.]




Other Ways to Change the JBL Go 2 Volume Control

Besides the volume control on the speaker, you can also adjust volume with the buttons on the paired source device too, including iPadOS, iOS, and Android devices.

But, we find that volume adjustments on the speaker do not change the volume setting on our Samsung J7 Sky Pro Galaxy Pro Android phone.  In fact, for this device, the volume control on the speaker appeared to affect the gain of the amplifiers in the speaker, and not the phone volume.  Indeed we noticed distortion in the speaker, with its volume set to half while the phone volume was at full (100 percent).  So, just keep in mind this caveat, so you can avoid “over driving” the JBL Go 2 with your Android device.

In this demo though, we’re playing YouTube content on our iPad Air, and streaming to the JBL Go 2 via the Bluetooth connection.  To make that happen, do the following.

1. Pair your JBL Go 2 to your Mobile Device

2. Begin Playing a Music Source

Start streaming an internet radio station, a song from YouTube or Spotify for example, or an Audible book. In this demo, we streamed YouTube audio to the speaker, as shown next.

3. Use your Source Mobile Device’s Volume Control Buttons to Set the Volume of the JBL Go 2

See this done in the next picture.

Picture of the YouTube app on iOS, as seen during adjusting the volume while playing a video.
YouTube app on iOS, as seen during adjusting the volume while playing a video.

Note the purple arrowed volume setter square with a speaker inside of it in the last picture.

Also note that the volume change you hear on the speaker lags by a second or so. Why? Because of the latency (delay) of the commands going across the Bluetooth airwaves.

Finally, again, we’re not covering here how to set volume for specific apps. So, we leave figuring out how to do this as a reader exercise.





Related Posts to JBL Go 2 Volume Control

  1. JBL Go 3 Volume Control Explained
  2. Apple Headphones Volume Control Gripe
  3. JBL Flip 5 Volume Control Explained
  4. How to Control Google Home Mini Volume
  5. JBL Bluetooth Speaker Volume Control Described

Other Posts About the JBL Go 2 Bluetooth  Speaker

  1. How to Know if JBL Go 3 Speaker is Fully Charged
  2. JBL Go 3 Factory Reset Instructions
  3. How to Charge JBL Go 3 Bluetooth Speaker
  4. How to Bass Boost JBL Go 3 Bluetooth Speaker
  5. JBL Go 3 Low Frequency Mode, Extra Bass

References

  1. JBL Go 2 Bluetooth Speaker Official Product Page at JBL.com

Revision History

  • 2021-07-25: First published.
%d bloggers like this: