JBL Go 3 Speaker Bluetooth Pairing

Gives the JBL Go 3 Speaker Bluetooth Pairing procedure. This works to pair this speaker with iOS media player devices. But similar procedures work for Android devices too.

JBL Go 3 Speaker Bluetooth Pairing: Step by Step

Start with your JBL Go 3 powered off (power button is dark). Th run through this routine to pair it to your iPad, iPhone, or iPod Touch iOS mobile device. We use an iPad Air tablet here.

1. Get to the Home Screen on your Source Bluetooth Device

Firstly, press the Home button to reveal the mobile iOS device’s Home screen.

2. Find the Settings App

Then we find ours on the second page of the iOS home screen on our iPad Air.

3. Bring up the Settings App

Thirdly, tap the Settings app icon.

The device then shows the first page of its Settings page.

4. Go to Bluetooth Settings  to Continue with JBL Go 3 Bluetooth Pairing

Our Bluetooth settings screen displays as follows. Note that Bluetooth is ON here. Now the JBL Go 3 is currently OFF. So it is not in Bluetooth pairing mode. Thus it does not appear in the   Bluetooth Devices   list. Also, we don’t see it since we’ve never paired it with this tablet before.

5. Turn On your JBL Go 3 Speaker

Then power up the Go 3 by fast pressing its  Power  button..

The speaker then powers up, and its status lamp slowly blinks white.  This means that it’s ready to receive a Bluetooth connection request.

But since our tablet does not know about this speaker, the Go 3 will not pair with it automatically.

6. Put the Speaker Into Pairing Mode

Now, to see your Go 3 on your iOS device, place it into Bluetooth discovery mode. Thus to do that, press and release the Bluetooth button.

When you press the Bluetooth Discovery Mode button, the Go 3 makes a repeating single pluck guitar sound. Also, the status lamp changes from a slow flashing to fast flashing white.

7. Find your Speaker on your Mobile Device to Continue with JBL Go 3 Speaker Bluetooth Pairing

We find our Go 3, as follows.

 

8. Pair with the Speaker

Then tap the speaker in the Other Devices section of the Bluetooth devices list.

Your device then pairs with the speaker.

The tablet’s   Bluetooth Settings  screen then changes to look something like the following.

9. Done with JBL Go 3 Speaker Bluetooth Pairing !

Finally, we have now paired the Go 3 with a tablet.

Other Posts About the JBL Go 3 Speaker

1. Finding Firmware Version on JBL Go 3 Speaker
2. How to Turn ON JBL Go 3 Speaker
3. How to Connect This Speaker
4. How to Check the Battery
5. Solving the Not Charging Problem

References for JBL Go 3 Speaker Bluetooth Pairing

1. 1. JBL Go 3 Speaker Official Product Page
   2. Where to Buy the JBL Go 3 Speaker