Two light LEDs may be blinking white on the JBL Wonderboom 1. There’s the Bluetooth pairing lamp. Also there’s the charging lamp, in the Power button. These are both on the top of the unit. The pairing lamp blinkss when pairing mode is active, and the charge lamp blinks when the JBL Wonderboom 1 is charging. Details on both of these blinking white lights follow.
When the Pairing button blinks white, the JBL Wonderboom 1 is in discovery or pairing mode.
The Power lamp blinks white while the JBL Wonderboom 1 is recharging.
This light blinks in a gradually dimming and brightening pattern. On this speaker, this LED is the only visual indication that charging is happening. But it does not tell how far along the charging is.
It blinks during charging whether the JBL Wonderboom 1 is OFF or ON.
As charging continues, the light keeps slowly blinking white. Furthermore, battery recharging is over when the lamp goes out, or turns solid white. It turns OFF when the speaker is OFF, and switches to a solid white glow when the speaker is ON.
The battery recharge cycle finishes when the speaker status lamp turns OFF. Even with the AC charger running, the lamp does not glow when battery is full. Not unless the speaker itself is running.
The Honeywell Thermostat Waiting on Equipment Messages sometimes appears on these smart thermostats. So these…
Honeywell provides good manuals for their WiFi smart thermostats. The same is true of the…
Gives our Honeywell Touchscreen Thermostat RTH7600D Review here. Now RTH7600D works with both central heating…
Here's our Honeywell Wi Fi Smart Thermostat RTH9580WF Review. Now the RTH9580WF is a clear…
This post gives Honeywell RTH9580WF WiFi setup directions for this touchscreen smart thermostat. Use this…
Temperature differential is the difference between the turn-on and turn-off temps on a thermostat, whether…