Bluetooth Speakers

JBL Wonderboom 1 Check Battery Level

Covers the JBL Wonderboom 1 check battery level procedure, and also, how to know if the battery is degrading over time.

JBL Wonderboom 1 Check Battery Level: Step by Step

1. First, Turn ON the JBL Wonderboom 1

You won’t be able to read battery charge status unless the speaker is ON.

The JBL Wonderboom 1 top view. Showing the dark -Power- button.

To turn on the speaker, press and release the Power button, circled in the last picture.

The little lamp in that button should then come on, as shown next, and the speaker should make its startup sound.  If it does not, then the battery could be completely dead.

The JBL Wonderboom 1 powered ON. Showing the glowing -Power- button. Gives some indication of battery level.

But as long as there’s some juice in the battery, the speaker should power up.  When it does, move on to the next step.

2. Press and Release the Volume UP and Volume DOWN Buttons to Hear the JBL Wonderboom 1 Battery Level

Press and release the center areas of the Volume UP and Volume DOWN buttons at the same time.  Find these areas in the picture shown next.

The -Volume UP(+)- and -Volume DOWN (-)- buttons.

When you press these buttons together, the speaker makes one to four “blunk” sounds to tell you how high the battery level is.  Four blunks means that the battery has between 75 and 100 percent charge.  Three blunks, and the battery has between 50 and 75 percent charge.  Two blunks denotes that you have between 25 and 50 percent charge in the speaker’s battery.  And finally, one blunk means between 0 and 25 percent charge.

Also, when the JBL Wonderboom 1 battery level gets critically low, the Power lamp starts flashing red.

Press these buttons any time the speaker is ON, to check the battery level.  The number of blunks you hear, lets you roughly guess how much time you have left to play the speaker, before it goes dead.  Since a fully charged JBL Wonderboom 1 plays for roughly ten hours.  So four blunks means that the speaker has between 7.5 and 10 hours of play time left before it goes dead.  Three blunks means that it will play for another 5 to 7.5 hours.  Two blunks means between 2.5 and 5 hours of music time left.  And 1 blunk means that you’ll get between 0 and 2.5 more hours of play time.

Other JBL Wonderboom 1 Posts

    1. How to Pair
    2. How to Sync
    3. Pairing with Google Home
    4. Reset Directions
    5. How to Connect

References for JBL Wonderboom 1 Check Battery Level

    1. Official JBL Wonderboom 1 Support Page
    2. Where to Buy the JBL Wonderboom 1
admin

Recent Posts

Connect Honeywell WiFi Thermostat to Router

You might need to Connect Honeywell WiFi Thermostat to Router for the first time, or…

49 seconds ago

Connect Honeywell Thermostat to Internet

You might need to ceconnect your Honeywell thermostat (t-stat) to the internet for the first…

13 mins ago

Change Time and Day on Honeywell Thermostat

.You can manually set the time and day on the Honeywell thermostat. But only when…

15 hours ago

How to Fix Honeywell WiFi Thermostat Not Cooling Down

Discusses How to Fix Honeywell WiFi Thermostat Not Cooling Down. Now this problem can happen…

18 hours ago

How to Register Honeywell WiFi Thermostat RTH9580WF

Gives the Register Honeywell WiFi Thermostat RTH9580WF procedure online, on the Honeywell Total Connect Comfort…

18 hours ago

How to Find Honeywell Thermostats Firmware Version

Here, we show How to Find Honeywell Thermostats Firmware Version that they are currently running.…

18 hours ago