Bluetooth Speakers

JBL Wonderboom 2 Pairing Mode

To pair your JBL Wonderboom 2 with a Bluetooth source device for the first time, or to update stale connection information in that device, you have to know about JBL Wonderboom 2 Pairing Mode. Why? Because in this mode, the speaker transmits  its name and currently valid connection data over the Bluetooth airwaves, which enables other nearby Bluetooth devices to pair to it.  So in this post, we show you how to put the JBL Wonderboom 2  speaker inpairing mode, to allow you to link it with phones, tablets, computers, and smart speakers.

JBL Wonderboom 2 Pairing Mode: Step by Step

1. Turn On the JBL Wonderboom 2

Firstly, turn on the speaker by rapidly pressing its  Power  button.

E.g. See this button that we point at with the yellow arrow, in the next picture.

The Top of the JBL Wonderboom 2. Showing the dark -Power- button.

The speaker then comes on, as pictured next.

The  -Power- button glowing white.

2. Press the Pairing / Discovery Mode Button for Two to Three Seconds

Secondly, to be able to discover your speaker on your source Bluetooth device, place it in pairing mode. For that, press and hold the the Pairing button, as circled in the next picture.

The -Bluetooth Pairing- button.

When you press this Pairing button, the speaker makes a cool pairing sound. Plus, a lamp in this button starts rapidly flashing white. See this in the last picture, circled in yellow.

3. Done !

Finally, while the Pairing button is blinking, the JBL Wonderboom 2 is now in pairing mode.  So you should  see your JBL Wonderboom 2 on any in-range phone, computer, tablet, or smart speaker, that is within several feet of it, as shown next.

iPadOS Bluetooth Settings page, showing the JBL Wonderboom 2 as found.

Other JBL Wonderboom 2 Posts

    1. Check Battery Directions
    2. The Buttons Explained

References

    1. Official JBL Wonderboom 2 Support Page
    2. Where to Buy the JBL Wonderboom 2
admin

Recent Posts

Fix DVD Skips and Freezes

We have nearly three decades experience playing and caring for digital video discs (DVDs). Indeed,…

3 hours ago

Telling That JBL Charge 3 is Charging

Lists ways of Telling That JBL Charge 3 is Charging. Now this BT speaker with…

3 hours ago

Reboot Samsung Galaxy J7

In this piece, we cover the Reboot Samsung Galaxy J7 procedure. You might do this…

4 hours ago

JBL Xtreme 2 Firmware Update

Here, we offer JBL Xtreme 2 firmware update procedure for this revised version of the…

6 hours ago

Echo Dot 2 Buttons

The Echo Dot 2 features several buttons and a light ring around its top, and…

6 hours ago

Sony SRS XG300 Power Button Not Working Fix

Here are some fix ideas for when you find the Sony SRS XG300 Power Button…

6 hours ago