When the JBL Wonderboom 2 Won’t Turn OFF, this likely means oneor more things as follows.
The 2 may not answer to the reset command while connected with a source Bluetooth device. So disconnect it before resetting. Since you can’t turn turn the speaker OFF at this point then turn OFF Bluetooth on the device to which the 2 is paired. This will break the connection, which it is best to do prior to resetting.
Find the Power and Volume DOWN buttons. The Power button is on the top of the speaker, near the front. Volume DOWN is the long plum line on the front, near the bottom. See these both pointed out by the green arrows in the next picture.
The unit then resets. Within a couple seconds, the unit switches off. Next, the falling electronic ker-plunk sound plays. Then the lamp in the Power button goes dark.
After reset, the 2 comes up in ready-to-connect mode, with the Pairing lamp rapidly flashing white.
No matter where we've lived in the northeast and Midwest, fruit flies bug us every…
Gives the procedure to Clear Settings on Honeywell Thermostat. Here, we cover doing this on…
In this post, we give the procedure to Change Honeywell Thermostat Temperature, specifically for the…
This gives common Troubleshooting Honeywell RTH9580WF Thermostat WiFi Problems techniques, to solve issues that you're…
This gives common Honeywell Wireless Thermostat Troubleshooting procedures to solve common problems. We worked through…
Here, we cover the procedure to Turn OFF Hold on Honeywell Thermostat. But why would…