Bluetooth Speakers

JBL Wonderboom Charging Light

Here we describe how to read the JBL Wonderboom charging light.  Now this speaker has a single LED on its top panel, close to the front. This tells the battery status. It shows whether it’s draining or charging. Or it indicates when the battery critically low.  However, it does not tell you the charging progress. Nor does it show how much energy the battery has left when discharging.  But it does change color when the battery reaches almost-dead state. More details below.

JBL Wonderboom Charging Light: How to Read It

1. The Lamp is OFF

When you power down the speaker with no charger, this lamp, that also doubles as a pilot light, is dark.  The lamp is also OFF when the charger IS feeding the speaker but the battery is full.

The JBL Wonderboom top view. Showing the dark -Power- button.

2. Shows Battery Recharging Progress

The status lamp  slowly flashes white while the speaker charges, as shown in the next picture.   On this speaker, this LED light is the only visual indication that charging is running.  But it does not tell how far along the battery recharging is.

The glowing -Power- button.

Note that this lamp blinks red when the battery is critically low, as we show next. You should recharge pretty soon when you notice that.

When you apply power, this red flashing light turns to a slowly blinking white.  This blink pattern appears during charging, whether the speaker is OFF or ON.

The Charging Light lamp glowing steady red on the JBL Wonderboom.

3. When the Light Goes Out, Then Charging Completes

As JBL Wonderboom charging continues, the light keeps slowly blinking white.  But it finishes when the lamp goes out, or turns white.  It turn OFF when the speaker is not running, and turns white when it is ON.

The battery recharge cycle finishes when the speaker status lamp turns off. Even with the AC charger working, the lamp does not glow when battery is full. Unless that is, the speaker itself is running.

If the speaker is ON when charging finishes, the lamp turns from flashing white to solid white.

4. The JBL Wonderboom Charging Light Does Not Tell Exact Charge Remaining

When you unplug from the charger, what was the Charging Light becomes the battery charge left indicator.  Well sort of.  If it glows white, then the battery has some amount of play time remaining. But you cannot tell how much.

But the only indication this light gives about the battery when not charging, is when the battery goes very low.  Then, it starts fast-flashing red, as we show above.

Other JBL Wonderboom Posts

    1. How to Check the Battery
    2. How to Turn ON
    3. How to Pair
    4. Reset Directions

References for JBL Wonderboom Charging Light

    1. Official JBL Wonderboom Support Page
    2. Where to Buy the JBL Wonderboom
admin

Recent Posts

Fix DVD Skipping

We've played digital video discs (DVDs) for nearly two decades now.  Daily watching them has…

4 hours ago

Stop DVD Skipping

We've played digital video discs (DVDs) for nearly two decades now.  Daily watching them has…

4 hours ago

Cleaning Vinyl Kitchen Floors Hints Tips Advice

The following hints, tips advice, and instructions describe cleaning vinyl kitchen floors.  Following these directions…

5 hours ago

Factory Reset Google Home Mini Speaker

Here we cover the Factory Reset Google Home Mini Speaker procedure. Now you might factory…

6 hours ago

Factory Reset Google Home Mini

Here we cover the Factory Reset Google Home Mini procedure. Now you might factory reset…

6 hours ago

How to Reboot Samsung Galaxy J7 Sky Pro Tracfone

In this piece, we run though How to Reboot Samsung Galaxy J7 Sky Pro Tracfone.…

6 hours ago