The JBL Wonderboom has two light LEDs that may be flashing. There’s the Bluetooth pairing lamp. Also there’s the charging lamp, in the Power button. These are both on the top of the unit. The pairing lamp flashes when pairing mode is active, and the charge lamp flashes when the JBL Wonderboom is charging. Details on both of these Light Flashings follow.
When the Pairing button flashes white, the JBL Wonderboom is in discovery or pairing mode.
The Power lamp flashes white while the JBL Wonderboom is recharging.
This light flashes in a gradually dimming and brightening pattern. On this speaker, this LED is the only visual indication that charging is happening. But it does not tell how far along the charging is.
It flashes during charging whether the JBL Wonderboom is OFF or ON.
As charging continues, the light keeps slowly flashing white. Furthermore, battery recharging is over when the lamp goes out, or turns solid white. It turns OFF when the speaker is OFF, and switches to a solid white glow when the speaker is ON.
The battery recharge cycle finishes when the speaker status lamp turns OFF. Even with the AC charger running, the lamp does not glow when battery is full. Not unless the speaker itself is running.
Discusses solutions for the Honeywell Thermostat Not Cooling Down issue. Now this can happen for…
Here is our Honeywell T87N1026 Large Thermostat Review. Now the T87N1026 offers a quick and…
The Honeywell T87N1026 large dial thermostat offers a quick and easy-to-install climate control solution, and…
The common Honeywell thermostat offers several ways (at least) to cut your heating and cooling…
The common Honeywell thermostat offers several ways (at least) to cut your heating and cooling…
Today's thermostats have so many new functions. So there are many more wires to connect…