About JBL Xtreme 1 Charger

Xtreme JBL speaker back view, showing the DC charging cord inserted.

The JBL Xtreme 1 speaker comes with an AC charger, discussed here. Furthermore, this charger fully recharges the speaker’s built in power bank in roughly four hours. Moreover, the Xtreme 1 plays for up to fifteen hours at average volume levels before needing another charge. So how would you find a suitable replacement if yours breaks? Thus, here we have the technical information about the JBL Xtreme 1 charger cord. We also show how to charge the speaker with it.

Firstly, the JBL Xtreme 1 charger cord is black in color, as shown next. It also has one barrel type DC power output plug. Additionally, a detachable AC power cable connects the power converter box to a standard wall outlet.

Charger adapter and cord Included with the JBL Xtreme 1 Bluetooth speaker.

About JBL Xtreme 1 Charger: The Details

Model Number: NSA60ED-190300. Input: 100-240 volts, 50-60 Hertz, 1.5 Amps Max. Output 19 volts DC, 3 amps Max. Then we have a positive center on the DC output plug. Made in China. UL Listed E312159 A.V. Power Supply.

The AC charger, bottom view, showing the specifications label.

Energy verified. Manufacturer: Shenzhen JingQuanHua Electronics Co. LTD. Other numbers found on the label: SU10551-15001. MSIP-REM-JQH-NSA60ED-195305. A/S 82-2-523-5504.

About JBL Xtreme 1 Charger: The Attached Cables

Next, this charger cord comes in two pieces. The first is the DC cable that they permanently attach to the power supply box. Then the next is an AC “cheater” style cord that plugs into the power converter box.

The AC Part of the Charger

Next, we show the AC input plug on that box. Now this is a pretty standard, non polarized AC cord. Now this means that you can insert the cord here either way. Also, the standard 110 volt AC plug on the other end of the cable has no polarity.

The speaker charger, showing the AC input port plug.

The power supply end of the AC is about five eighths of an inch long and a quarter inch wide.

JBL Xtreme 1 AC adapter cheater cord, appliance end plug, laying against a ruler.

Also, the standard 110 volt AC plug on the other end of the cord also has no polarity.

Now to the other connector in this power adapter.

The DC Output Part of the Cord

Furthermore, the DC output jack measures around 0.3 inches or 8 mm long.

The DC output jack laying against a ruler.

Furthermore, this DC plug has a notch near the tip. This also enhances secure holding to the speaker. Plus, this plug is about three sixteenths of an inch wide, or roughly 5 mm. But we claim no degree of precision on these measurements.

JBL Xtreme 1 charger supply cord, showing the end of its DC output jack laying against a ruler.

How to Use the JBL Xtreme 1 Charger

Finally, to use this adapter, you connect the cord and speaker together via the DC cable and connector. So the Xtreme 1 has one DC input plug, labeled Power, inside its port panel just beneath the orange zipper.

Rear view of the speaker, showing its ports zipper open, with the power input charging port highlighted.

Finally, use this input to recharge the speaker with this accessory charger cord.

Xtreme 1 JBL speaker back view, showing the DC charging cord inserted.

The speaker plugged in and charging from AC power.