The Logitech Wonderboom 1 has two light LEDs that may be flashing. There’s the Bluetooth pairing lamp. Also there’s the charging lamp, in the Power button. These are both on the top of the unit. The pairing lamp flashes when pairing mode is active, and the charge lamp flashes when the Logitech Wonderboom 1 is charging. Details on both of these Light Flashings follow.
When the Pairing button flashes white, the Logitech Wonderboom 1 is in discovery or pairing mode.
The Power lamp flashes white while the Logitech Wonderboom 1 is recharging.
This light flashes in a gradually dimming and brightening pattern. On this speaker, this LED is the only visual indication that charging is happening. But it does not tell how far along the charging is.
It flashes during charging whether the Logitech Wonderboom 1 is OFF or ON.
As charging continues, the light keeps slowly flashing white. Furthermore, battery recharging is over when the lamp goes out, or turns solid white. It turns OFF when the speaker is OFF, and switches to a solid white glow when the speaker is ON.
The battery recharge cycle finishes when the speaker status lamp turns OFF. Even with the AC charger running, the lamp does not glow when battery is full. Not unless the speaker itself is running.
Today's thermostats have so many new functions. So there are many more wires to connect…
This piece explains How to Reset Settings on Honeywell Thermostat. Now a reset of these…
This demo shows How to Reset Honeywell Touchscreen Thermostats back to factory default settings. We…
This post explains How to Reset Honeywell WiFi Thermostat Settings. We demonstrate this on the…
.You can manually set the time and day on the Honeywell thermostat. But only when…
This post gives the Hard Reset Honeywell Thermostat routine. We show this on the RTH9580WF…