This post gives the Logitech Wonderboom 1 Sync to common Bluetooth devices procedure. Start with your Logitech Wonderboom 1 switched OFF (all dark LEDs). Then, follow along to Sync it with most any Bluetooth source device. In this demo, we show how Syncing works on our iPad Air mobile computre. But like procedures work for iPhones, iPods, and Android phones and tablets as well.
Press the Home button to get to the Home page. See our Home screen as shown next.
Practically all mobile devices have a Settings app.
We found ours on the second page of the Home screen on our tablet.
Tap the Settings app icon.
For this demo, the iPad Air then displays the first page of its Settings screen, as we see in the next screenshot
Tap the Bluetooth item, as pointed at by the dark green arrow in the last screenshot above.
Our Bluetooth Settings screen then appears as follows. Note that our Bluetooth is switched ON here. But since the Logitech Wonderboom 1 speaker is currently OFF, it does not show in either the My Devices or Other Devices lists on the tablet yet, Why? Because we’ve not yet Synced it with this iPad before. Plus, the speaker is not yet transmitting its BT connection info. See this scenario, that appears as shown next.
Note in this picture that there’s no Logitech Wonderboom 1 speaker listed yet.
Turn on the unit by quickly pressing its Power button. See this button, circled in green, in the next picture.
The unit then comes on.
Now, to see your speaker on your mobile device, place it into BT Syncing mode. For that, press and release the Bluetooth button, as circled in the next picture. You may have to hold it in for a few seconds until this discovery mode starts running.
When the Logitech Wonderboom 1 enters discovery mode, it makes a distinctive sound several times. Plus, a lamp in this button starts rapidly flashing white. See this in the last picture above.
See the picture next. We found ours, as circled in green.
Tap the listed speaker in the Other Devices section of the Bluetooth Devices list, shown above.
Your iPad Air then Syncs with the Logitech Wonderboom 1 (it appears as “WONDERBOOM” in this demo).
The Bluetooth Settings screen then changes to display something like the following.
Note that the Logitech Wonderboom 1 now appears as connected, as circled inside the green oval in the last picture.
Lastly, we have now successfully Synced our Logitech Wonderboom 1 wireless speaker with a typical mobile device. Now, audio output from that source device plays on this wireless speaker, which is what you want. The same happens with most other Bluetooth devices.
Here, we show how to factory reset a Wonderboom to put it back to its…
Gives the connect Logitech Wonderboom to iPhone procedure. Now this can also work with other…
This post gives the Alexa Dot Bluetooth Pairing procedure. These directions include the all Bluetooth…
You can reset all of the smart speakers in the Google Home family. These include…
Here, we walk you through How to Install HP DeskJet 3630 Series Wireless Printer. In…
Perform this HP DeskJet 3632 setup routine to clear out the existing WiFi setting. You…