Bluetooth Speakers

Logitech Wonderboom 2 Battery Level

Gives Logitech Wonderboom 2 battery level check instructions, and also, how to know if the battery is losing performance over time.  When you press the right buttons while the speaker is powered up, it emits one or more sound pulses to tell you how full the battery is, as described below.

Logitech Wonderboom 2 Battery Level: Step by Step

1. First, Turn ON the Logitech Wonderboom 2

You won’t be able to read battery level unless the speaker is ON.

The top of the Logitech Wonderboom 2. Showing the dark -Power- button.

To turn on the speaker, press and release the Power button, pointed out by the yellow arrow the last picture.

The little lamp in that button should then light up, as shown next, and the speaker should make its startup sound.  If it does not, then the battery could be completely dead.

The white glowing -Power-button.

But as long as there’s some energy in the battery, the speaker should power up.  When it does, move ahead to the next step.

2. Press and Release the Volume UP and Volume DOWN Buttons to Hear Logitech Wonderboom 2 Battery Level

Press and release the center areas of the Volume UP and Volume DOWN buttons at the same time.  Find these areas in the picture shown next. The Volume Up button is located in the center of the plus (+) symbol on the speaker front, and the Volume Down button is found in the middle of the vertical minus (-) symbol, just below the plus symbol.

The -Volume UP- and -Volume DOWN- buttons. Press these together for an audio readout of the Logitech Wonderboom 2 battery level.

When you press these buttons together, the speaker makes one to four “blunk” sounds to tell you how high the battery level is.  Four blunks means that the battery has between 75 and 100 percent charge.  Three blunks, and the battery has between 50 and 75 percent charge.  Two blunks denotes that you have between 25 and 50 percent charge in the speaker’s battery.  And finally, one blunk means between 0 and 25 percent charge.

Also, when the Logitech Wonderboom 2 battery level gets critically low, the Power lamp starts flashing red, as shown next.

The red ‘battery low’ light.

How to Hear It

Press these buttons any time the speaker is ON, to check the battery level.  The number of blunks you hear, lets you roughly guess how much time you have left to play the speaker, before it goes dead.  Since a fully charged Wonderboom plays for roughly ten hours.  So four blunks means that the speaker has between 7.5 and 10 hours of play time left before it goes dead.  Three blunks means that it will play for another 5 to 7.5 hours.  Two blunks means between 2.5 and 5 hours of music time left.  And 1 blunk means that you’ll get between 0 and 2.5 more hours of play time.

Other Logitech Wonderboom 2 Posts

    1. How to Turn OFF
    2. How to Connect to iPhone
    3. Factory Reset
    4. Stereo Pairing Help
    5. Won’t Turn OFF

References

    1. Official Logitech Wonderboom 2 Support Page
    2. Where to Buy the Logitech Wonderboom 2
admin

Recent Posts

Fix DVD Skips and Freezes

We have nearly three decades experience playing and caring for digital video discs (DVDs). Indeed,…

4 hours ago

Telling That JBL Charge 3 is Charging

Lists ways of Telling That JBL Charge 3 is Charging. Now this BT speaker with…

4 hours ago

Reboot Samsung Galaxy J7

In this piece, we cover the Reboot Samsung Galaxy J7 procedure. You might do this…

4 hours ago

JBL Xtreme 2 Firmware Update

Here, we offer JBL Xtreme 2 firmware update procedure for this revised version of the…

6 hours ago

Echo Dot 2 Buttons

The Echo Dot 2 features several buttons and a light ring around its top, and…

6 hours ago

Sony SRS XG300 Power Button Not Working Fix

Here are some fix ideas for when you find the Sony SRS XG300 Power Button…

6 hours ago