Here, we demo Logitech Wonderboom hard reset instructions. These restore the default settings to this Logitech speaker. Hard reset works as follows.
Hard resetting Logitech Wonderboom speakers wipes any memorized Bluetooth devices from memory. And, clearing this information stops the Logitech from pairing to any nearby devices after the reset. Further, you would hard reset the Logitech Wonderboom to re gift it. Or, you just wish to halt its auto pairing with devices you no longer play through lt.
Press and release the Power button. The status lamp in that button lights and you hear a power-up sound. We circle the Power button in the next picture.
Then, the status light comes on solid or it blinks, as shown next.
The Logitech Wonderboom makes a unique sounding turn-on noise. The speaker is then ready for hard reset when this sound finishes. It may or may not pair with a device. That depends on whether you have any in-range Bluetooth devices that know about the unit and that it have previously paired with it as well. Whether paired or not, hard reset works the same way, as follows.
This speaker seems to not respond to hard reset requests while connected with a source Bluetooth device. So, unpair the speaker before resetting.
Find the Power and Volume DOWN buttons. The Power button is on the top of the speaker, near the front. Volume DOWN is the long vertical line on the front, near the bottom. We point out both of these with the green arrows in the next picture.
The Logitech Wonderboom 1 then enters hard reset. Then in a few seconds, the unit powers off afterwards. E.g. The falling electronic ka-plunk sound plays. Next the status lamp in the Power button goes dark.
Next, power on the speaker again, as we detail in step 1 above.
After a hard reset, the speaker comes up in ready-to-pair mode again, with the pairing lamp rapidly flashing white.
The hard reset is done now. So go ahead and let someone else use this speaker. Or pair it again with your favorite Bluetooth devices.
After this, the speaker no longer auto connects with any previously paired Bluetooth devices. Thus, to restore auto BT pairing, you pair this speaker manually with your desired device(s). Then any time that both the Logitech and the source device have Bluetooth running, pairing again occurs without you having to do anything.
Don’t forget to delete any now-stale connections to Logitech Wonderboom from your source Bluetooth devices that you set up prior to hard resetting the speaker. These will no longer work. So you’ll want to “forget” them in your source device’s settings pages.
This post explains How to Reset Honeywell WiFi Thermostat Settings. We demonstrate this on the…
.You can manually set the time and day on the Honeywell thermostat. But only when…
This post gives the Hard Reset Honeywell Thermostat routine. We show this on the RTH9580WF…
This post gives the Honeywell Thermostat Hard Reset routine. We show this on the RTH9580WF…
This post gives the Honeywell WiFi Thermostat Factory Reset routine. We show this on the…
This post gives the Honeywell RTH9580WF Reset routine for this smart programmable thermostat. We show…