To pair the JBL Wonderboom 1 with a BT source device for the first time, or to refresh the connection information stored on that device, you must know how to launch discovery mode on this unit. Further, in this mode, the JBL Wonderboom 1 sends its Bluetooth name and current linkage info on the BT airwaves. So in this post, we give the Make JBL Wonderboom 1 Discoverable procedure. Thus you can then join it to phones, tablets, computers, and smart speakers.
First, turn on the unit by pressing and releasing its Power button once.
E.g. See this button, that we point at with the bright green arrow in the next picture.
The JBL Wonderboom 1 then comes on, and the Power button lights up white to signal that power is ON, as shown next.
Now, to see the JBL Wonderboom 1 on your source Bluetooth device, place it into discovery mode. For that, press and release the the Discovery Mode button.
E.g. This button we point out in the next picture.
When you press this button, the JBL Wonderboom 1 plays a plucking guitar pairing sound. Furthermore, that same button begins fast-flashing white.
While the Discovery Mode button is flashing, you should see your JBL Wonderboom 1 on any phone, computer, or tablet, that is within several feet of it, as seen next. Our UE here has its default name here, called “Wonderboom”.
To pair the Ultimate Ears Wonderboom 1 with a BT source device for the first…
To pair the UE Wonderboom 1 with a BT source device for the first time,…
To pair the Logitech Wonderboom 1 with a BT source device for the first time,…
To pair the Wonderboom 1 with a BT source device for the first time, or…
To pair the Ultimate Ears Wonderboom with a BT source device for the first time,…
To pair the UE Wonderboom with a BT source device for the first time, or…