Make Ultimate Ears Wonderboom 1 Discoverable

To pair the Ultimate Ears Wonderboom 1 with a BT source device for the first time, or to refresh the connection information stored on that device, you must know how to launch discovery mode on this unit.  Further, in this mode, the Ultimate Ears Wonderboom 1 sends its Bluetooth name and current linkage info on the BT airwaves.  So in this post, we give the Make Ultimate Ears Wonderboom 1 Discoverable procedure.  Thus you can then join it to phones, tablets, computers, and smart speakers.

Make Ultimate Ears Wonderboom 1 Discoverable: Step by Step Routine

1. Turn On the Ultimate Ears Wonderboom 1

First, turn on the unit by pressing and releasing its  Power  button once.

E.g. See this button, that we point at with the bright green arrow in the next picture.

The Ultimate Ears Wonderboom 1 then comes on, and the Power button lights up white to signal that power is ON, as shown next.

2. Press the Discovery Mode Button and Release when the Unit Makes the Discovery Mode Sound

Now, to see the Ultimate Ears Wonderboom 1 on your source Bluetooth device, place it into discovery mode. For that, press and release the the Discovery Mode button.

E.g. This button we point out in the next picture.

When you press this button, the Ultimate Ears Wonderboom 1 plays a plucking guitar pairing sound. Furthermore, that same button begins fast-flashing white.

3. Done with Make Ultimate Ears Wonderboom 1 Discoverable

While the Discovery Mode button is flashing, you should see your Ultimate Ears Wonderboom 1 on any phone, computer, or tablet, that is within several feet of it, as seen next. Our UE here has its default name here, called “Wonderboom”.

Other Ultimate Ears Wonderboom 1 Posts

1. 1. Fixing the Won’t Turn ON Problem
   2. Suggested Chargers
   3. How to Adjust Volume
   4. Turn OFF Instructions
   5. Won’t Charge Fixes

References

1. 1. Official Ultimate Ears Wonderboom 1 Support Page
   2. Where to Buy the Ultimate Ears Wonderboom 1