Make Wonderboom Discoverable

An iOS Bluetooth Settings page. Showing the Wonderboom 1 as Discovered but not paired.

To pair the Wonderboom with a BT source device for the first time, or to refresh the connection information stored on that device, you must know how to launch discovery mode on this unit. Further, in this mode, the Wonderboom sends its Bluetooth name and current linkage info on the BT airwaves. So in this post, we give the Make Wonderboom Discoverable procedure. Thus you can then join it to phones, tablets, computers, and smart speakers.

Make Wonderboom Discoverable: Step by Step Routine

1. Turn On the Wonderboom

First, turn on the unit by pressing and releasing its Power button once.

E.g. See this button, that we point at with the bright green arrow in the next picture.

The Wonderboom top view. Showing the dark -Power- button.

The Wonderboom then comes on, and the Power button lights up white to signal that power is ON, as shown next.

The Wonderboom powered ON. Showing the top view, with the glowing -Power- button.

2. Press the Discovery Mode Button and Release when the Unit Makes the Discovery Mode Sound

Now, to see the Wonderboom on your source Bluetooth device, place it into discovery mode. For that, press and release the the Discovery Mode button.

E.g. This button we point out in the next picture.

The -Discovery Mode- button.

When you press this button, the Wonderboom plays a plucking guitar pairing sound. Furthermore, that same button begins fast-flashing white.

3. Done with Make Wonderboom Discoverable

While the Discovery Mode button is flashing, you should see your Wonderboom on any phone, computer, or tablet, that is within several feet of it, as seen next. Our UE here has its default name here, called “Wonderboom”.

The iOS Bluetooth Settings page. Showing the Wonderboom as discovered.