Reset Honeywell RTH9580WF

Covers the Reset Honeywell RTH9580WF thermostat procedure. Now this method does the following.

1. 1. First of all, it clears out all custom settings.
   2. Then, it resets the WiFi network.
   3. Lastly, it restores RTH9580WF back to factory default state.

So, follow the steps below, to hard reset this remote controlled thermostat. We suggest this routine when fixing problems with the RTH9580WF. Resetting can rule out the chance that faulty settings are causing the RTH9580WF to act funny.

Keep in mind though, that after doing this, the RTH9580WF forgets any programmed settings. So you’ll have to re enter your WiFi network name and password again. Also, your custom programs, if any, will go away. This returns the RTH9580WF to the built-in heating and cooling schedules. So again, you may need to adjust them again for to your specific needs.

Reset Honeywell RTH9580WF: Prior to Resetting

Grab your Manual

Before restoring to factory default settings, gather your RTH9580WF manual that shipped with it. Or, find it online at Honeywell’s web site.

Jot Down the Current Thermostat Program Schedule

Write down the current daily program schedule currently stored in the RTH9580WF. Do this if you’ve changed it from the default schedule.

Write Down any other Settings you’ve Changed from Default

Then, run down through the menus in the thermostat. Jot any settings that you changed prior that let the RTH9580WF work with your furnace. These include filter-change reminders, WiFi network connection info, system type, thermostat name, location, et al.

Reset Honeywell RTH9580WF: Step by Step

1. First, Tap the  Menu  button on the Touchscreen 

Find this button in the picture above, at the top right corner of the screen.

Then, scroll down by pressing the down arrow key, until you see the Preferences button, as shown next.

2. Then, Tap the Preferences Button

When the Preferences screen appears, scroll with the down-arrow key.  Look for the  “Restore Factory Defaults” button.  We circled this in red in the next picture.

3. Then, Tap the “Restore Factory Defaults” Button

The thermostat then prompts you to confirm that you surely want to restore the RTH9580WF, as shown next.

4. Then Confirm that you Want to Reset, to Continue with Reset Honeywell RTH9580WF

WARNING: Tapping the green Yes button next, erases all user specific settings. So do not reset until you feel that you can set it up again after. Get help from a climate control technician if you’re not sure.

If you wish to proceed, then tap the green Yes button.  Otherwise, tap the red No button.

When you press Yes, the display then shows the Restoring Factory Default Settings screen for a bit, as shown next.

Then, after boot-up, the RTH9580WF prepares to receive new customer data from you.  While it does this, it shows the Please Wait screen as follows.

5. Enter New Startup Data at the Prompts

Then, the RTH9580WF prompts you to enter some initial settings. Finally, this allows the RTH9580WF to start up with working default values, as shown next.

After reset, follow the prompts. They ask for info about your WiFi network and HVAC system.

6. Thermostat Reset Done!

At last, you have now restored your RTH9580WF to factory default settings.

Other Posts About the Honeywell RTH9580WF

1. 1. Honeywell RTH9580WF WiFi Setup Instructions
   2. Change WiFi Network on Honeywell Smart Thermostat RTH9580WF
   3. Change Time and Day on Honeywell RTH9580WF Thermostat, How To
   4. Connecting Amazon Echo Dot to Honeywell Thermostats
   5. Fixing WiFi Problems on Honeywell RTH9580WF Smart Thermostat

References for Reset Honeywell RTH9580WF

1. 1. Honeywell Total Connect Comfort Solutions Web Site
   2. Where to Buy the Honeywell RTH9580WF