Picture of the Honeywell RTH9580WF WiFi Smart Thermostat, displaying the Home screen.

How to Reset Honeywell Thermostat RTH9580WF

This post covers How to reset Honeywell thermostat RTH9580WF. This method does the following.  First of all, it clears out all custom settings.  Then, it resets the WiFi network. Last, it restores RTH9580WF back to factory default state.  So, follow the steps below, to hard reset this remote controlled thermostat.
We suggest this routine when fixing problems with the RTH9580WF. Resetting can rule out the chance that faulty settings are causing the RTH9580WF to act funny.

Keep in mind though, that after doing this, the RTH9580WF forgets any programmed settings. So you’ll have to re enter your WiFi network name and password again. Also, your custom programs, if any, will go away. This returns the RTH9580WF to the built-in heating and cooling schedules. So again, you may need to adjust them again for to your specific needs.

Picture of the Home screen on the Honeywell thermostat model RTH9580WF.
The Home screen on the Honeywell thermostat model RTH9580WF.

Prior to Resetting to Factory Default Settings

Grab your Manual

Before restoring to factory default settings, gather your RTH9580WF manual that shipped with it. Or, find it online at Honeywell’s web site.

Jot Down the Current Thermostat Program Schedule

Write down the current daily program schedule currently stored in the RTH9580WF. Do this if you’ve changed it from the default schedule.

Write Down any other Settings you’ve Changed from Default

Then, run down through the menus in the thermostat. Jot any settings that you changed prior that let the RTH9580WF work with your furnace. These include filter-change reminders, WiFi network connection info, system type, thermostat name, location, et al.





How to Reset Honeywell Thermostat RTH9580WF

1. First, Tap the  Menu  button on the Touchscreen 

Find this button in the picture above, at the top right corner of the screen.

Then, scroll down by pressing the down arrow key, until you see the Preferences button, as shown next.

Picture of the -Menu- screen showing the -Preferences- button.
The -Menu- screen showing the -Preferences- button.

2. Then, Tap the Preferences Button

When the Preferences screen appears, scroll with the down-arrow key.  Look for the  “Restore Factory Defaults” button.  We circled this in red in the next picture.

Picture of the -Menu->Preferences- page, showing the -Restore Factory Defaults- button.
The -Menu->Preferences- page, showing the -Restore Factory Defaults- button.

3. Then, Tap the “Restore Factory Defaults” Button

The thermostat then prompts you to confirm that you surely want to restore the RTH9580WF, as shown next.

4. Then Confirm that you Want to Reset, to Continue with How to Reset Honeywell Thermostat RTH9580WF

WARNING: Tapping the green Yes button next, erases all user specific settings. So do not reset until you feel that you can set it up again after. Get help from a climate control technician if you’re not sure.

Picture of the -Restore Factory Defaults- confirmation screen.
The -Restore Factory Defaults- confirmation page.

If you wish to proceed, then tap the green Yes button.  Otherwise, tap the red No button.

When you press Yes, the display then shows the Restoring Factory Default Settings screen for a bit, as shown next.

Picture of the -Restoring Factory Default Settings -screen during reset.
The -Restoring Factory Default Settings -screen during reset.
After some seconds, the screen goes dark. The RTH9580WF reboots next.  Then, the boot screen, showing the logo shows next, as shown below.
Picture of the Boot screen after factory reset completes.
The Boot screen after factory reset completes.

Then, after boot-up, the RTH9580WF prepares to receive new customer data from you.  While it does this, it shows the Please Wait screen as follows.

Picture of the -Please Wait- screen after booting.
The -Please Wait- screen after booting.

5. Enter New Startup Data at the Prompts

Then, the RTH9580WF prompts you to enter some initial settings. Finally, this allows the RTH9580WF to start up with working default values, as shown next.

Picture of the -Connect WiFi Network- prompt on the Honeywell thermostat RTH9580WF model.
The -Connect WiFi Network- prompt on the Honeywell thermostat RTH9580WF model.

After reset, follow the prompts. They ask for info about your WiFi network and HVAC system.

6. Thermostat Reset Done!

At last, you have now restored your RTH9580WF to factory default settings.

Other Posts About the Honeywell RTH9580WF Thermostat

    1. Honeywell RTH9580WF WiFi Setup Instructions
    2. Change WiFi Network on Honeywell Smart Thermostat RTH9580WF
    3. Change Time and Day on Honeywell RTH9580WF Thermostat, How To
    4. Connecting Amazon Echo Dot to Honeywell Thermostats
    5. Fixing WiFi Problems on Honeywell RTH9580WF Smart Thermostat

References forHow to Reset Honeywell RTH9580WF Thermostat

    1. Honeywell Total Connect Comfort Solutions web site