Reset Xfinity XR2 U2 Remote

Sometimes, most remotes develop strange behaviors which need a hard reset to clear up. So in this post, we give the Reset Xfinity XR2 U2 Remote procedure, to set it back to its factory default state. If you hard reset the XR2 U2 though, remember that this remote may not work again until you reprogram it. So, do not run this hard reset routine unless you know how to set the XR2 remote up again.

This process often fixes many problems. Explicitly, key presses not working. Stuck-on lights. Keys sending bad commands The channel UP DOWN buttons change volume instead. Pressing the SAT key switches the remote to DVD player mode instead of SAT.

Static charge snaps when you pick up the remote, may change the settings. Static might raise these errors. Also, almost-dead batteries may change the remote’s programming.

These remotes are not immune to these issues. And, they will not repair themselves until you hard reset the remote control to its default state. Then, program it again from scratch.

Reset Xfinity XR2 U2 Remote: Cautions and Warnings

Round up the make and model numbers of your home A/V equipment. That is, get them for your cable box, DVR, TV, and any other device you control with this Xfinity remote. You’ll need this data to reprogram the flipper after reset.

Further, before resetting, make sure you have the remote’s set up instructions. The XR2 U2 remote has them printed on its back.

Finally, put new batteries in. Make sure that you’re working with a fresh set of batteries before reset. You don’t want them to go dead during the reset. Why? Because fading batteries during reset could brick this remote, and render it junk forever.

Reset Xfinity XR2 U2 Remote: Step by Step

References

1. Where to Buy the Xfinity XR2 U2 Remote