The SmartWay Solutions VIP3000 talking digital thermostat is a full-featured 5-2 programmable thermostat, and we review our years of experience with it here. First off, they built in high accessibility for blind users, with its clear and loud human-sounding male voice. The VIP 300 also has a high-visibility LED-lighted display for low vision users.
Not only does it speak the most often used functions. But it also voice prompts for nearly all the menus and options too. See the settings on the bright, medium-contrast screen. Further, they well placed its buttons. The most often-used buttons prominently positioned. And, they hide the less used ones beneath an access hatch door on the bottom front.
This talking thermostat speaks (hear it here). This allows easy setting by vision-impaired and blind home dwellers. The unit also comes with a big 20-page large print user’s and installer’s guide. SmartWay also provides operating instructions on an audio CD. This also has problem solving tips for commonly seen issuces. Plus, get the manuals online in PDF files if you want. See the references below for links to these.
Bhe voice prompts are so all-inclusive and intuitive. Indeed, once you finish setup, you rarely need to check the manuals. Turn off audio playback while programming if desired. Otherwise, the t-stat speaks the current temperature, set point temperature, and all programmable options.
Easy to use for vision impaired and fully sighted operators as well. The large characters also allow sighted assistants to help blind users run through the initial setup more quickly.
They intended the VIP 300 mostly for residential application. So, it controls most all typesof single transformer climate control systems (furnaces and HVAC units). These include the following.
This thermostat also supports three stage heat with two stage cooling furnaces. It controls gas, oil, or electric furnaces, along with heat pumps and multi-fuel units.
This t-stat stores the name and telephone number of your HVAC contractor. You may then quickly retrieve this info when your HVAC system breaks down.
The temperature reading shows in either Fahrenheit or Celsius.
The five-day, two-day scheduling provides for four schedule periods (Wake, Leave, Return, and Sleep). For each period, you may set the start time and temperatures for both heating and cooling modes.
Contains several time counters. These keep track of the time since the last maintenance visit. This thermostat remembers how long since the filter cleaning. Or, it counts the hours since the last change of the UV light for air purification. Finally, you can keep track of when you did the last routine maintenance. Adjust the time for each of these between 3 and 24 months. When they expire, you get an alert (via pressing the REPORT button).
This t-stat has delay function that limits how often the compressor turns on. This compressor short-cycle protection prevents HVAC damage.
Plus, regardless of the temperature setting or system state (Heat, Cool, or Off) the VIP 3000 protects your pipes. How? It switches on your heat, should the temperature in your home fall below 40 degrees. This prevents pipe freezing, pet discomfort, and other hardships of a too-cold house.
That is, the thermostat switches automatically between Heat and Cool, depending on the current temperature. You can adjust the “dead zone.” The dead zone is the temperature range between the switch-to-cool and switch-to-heat temperature.
Sophisticated fan control for forced air climate control systems. Not only can you set the fan to manual or auto mode. But you can also program how many minutes out of each hour the fan runs. This allows energy savings while also giving cleaner air in the home.
Heat pump owners can switch to “Emergency Heat” mode. Here, the thermostat turns off the heat pump. Then, auxiliary gas or electric heating switches on. One might do this during extremely cold spells when the heat pump is inefficient. Also switch to emergency heat when the heat pump need servicing.
You can suspend the program schedule. Then the VIP3000 works quite well as a strictly manual thermostat. This allows continuous adjustment of home temperature. You do not need to set up the daily scheduling features. Program suspension is either permanent or temporary, lasting until the next programmed time period starts.
A “Hi Delay” feature controls how long the switch over between heat and cool takes. This is the time the thermostat waits after turning on first stage heating / cooling kicking on the second stage. The display shows when multiple stage operation happens.
The VIP3000 runs on batteries, the four AA alkaline batteries. So, it fully functions when removed from the wall-mounted base. So, you can take the unit to a brightly-lit table or reading chair to program it. Then, once done with that, snap it back onto the wall base. It cannot control your furnace while off the wall. This is because removing the t-stat breaks the connection to the furnace. Snapping the computer unit back to the wall reestablishes these connections. The t-stat sounds an alert when the batteries need replaced.
The batteries also provide backup during power failures. The unit does not forget your programs and settings during power outages.
You can lock out the programmable features if all you want is a manually controllable thermostat. A system lockout feature also prevents unauthorized changing of any setting by anyone but the user / owner.
can return the unit to its factory default settings and programs should erratic thermostat behavior be observed. However, this reset does not restore the physical DIP switch settings inside.
SmartWay includes a limited, one-year guarantee against problems and failures.
Cannot monitor or control this t-stat remotely via a smartphone. Has no internet connectivity features.
We could easily not reach the volume control for the speech. To adjust it, you must remove the front panel and use a Philips screwdriver. Not sure why they just did not include the volume setting in the firmware. But they didn’t.
Does not support separate programming of individual days. This five-day, two-day model thermostat supports one temperature schedule for weekdays (Monday through Friday), and weekend days (Saturday and Sunday).
Does not control electric baseboard or other “line voltage” heaters without additional auxiliary equipment. This talking thermostat controls 24-volt (or less) furnace systems only.
So, you hear the clicking as heating, cooling, or fans turn on and off.
You can set the current day and time, but only manually. Auto time setting from the internet is not available.
The display back light shuts off too fast. We prefer to set the light-on time lengths ourselves. Also let’s have a setting that keeps the light on all the time. That way, we could find the thermostat in the dark easily.
As vision impaired users ourselves, delighted in this talking thermostat. SmartWay Solutions has demonstrated great knowledge and careful design of this, the most accessible programmable thermostat that we’ve ever encountered. The price is roughly comparable to other non-talking programmable digital thermostats; only modestly more costly. The audio feedback is easy to understand, American English, and the buttons are big enough for very rapid actuation. The added voice makes the slightly added cost well worth it. We’d rate this unit at 98 out of 100.
We got ours directly from our building’s HVAC contractor. However, you may order the VIP3000 right from SmartWay, or online re-sellers. It costs roughly $200.
The SmartWay Solutions VIP3000 programmable thermostat is a full-featured 5-2 talking thermostat, and we review…
The Talking Digital Thermostat VIP3000 from SmartWay Solutions is a full-featured 5-2 programmable thermostat, and…
The SmartWay Solutions VIP3000 audible thermostat is a full-featured 5-2 programmable type and we talk…
The JBL Charge 4 does not come with an AC power adapter. But you can…
Here, we show Connect Alexa Spot to Internet, using the Amazon Alexa Echo Spot talking…
Here, we show how to reset the Amazon Alexa Dot 3rd Generation to return it…