The front view of the Sony SRS X11 mini cube speaker.

Sony Cube Speaker Reset Instructions

Gives Sony cube speaker reset instructions, to return this unit to its default fresh-out-of-the-box settings. Resetting restores the cube to its default factory state. Plus, resetting erases any earlier paired Bluetooth devices from memory. Clearing these stops this cube speaker from pairing to said devices whenever they come into range. Also, you might reset to get this speaker ready for sale or re-gifting, or to stop it from pairing with devices you no longer wish it to connect with.





Sony Cube Speaker Reset Instructions, Step by Step

1. Turn the Cube ON

Press and release the Power button for a half-second or so. Find the Power button as shown in the next picture.

The -Power- button on the Sony cube speaker.
The Sony cube speaker -Power- button.

Then, the status light comes on, as shown next.  This light we find on the bottom edge of the front of the unit.

Picture of the glowing -Status- light. Sony Cube Speaker Reset.
The -Status- lamp glowing.

The cube makes two ding-dong sounding beeps when it powers up, whether it links to a nearby device or not. But whether or not it does so, this reset routine works the same way, as follows.

2. Press and Hold the Volume DOWN , Volume UP, and Power Buttons at the Same Time

Find these buttons as shown next.  All three of them we find on the top of the speaker cube, near the front edge, as we show in the next picture.

Picture of the -Power-, -Volume DOWN-, and -Volume UP- buttons.
The -Power-, -Volume DOWN-, and -Volume UP- buttons.

The cube then enters reset mode after a short delay.

Next, the speaker powers OFF, and the status lamp goes out, as shown next. Note that on this speaker, there is no power-down sound.

Picture of the dark -Status- light on the speaker.
The dark -Status- lamp.

3. Check that your Sony Cube Speaker Did Indeed Reset

Next, power on the cube again, as we detailed in step 1 above.

Note that after a reset, this speaker comes up in discovery mode. The Status lamp blinks white quickly to announce this.  This signals you to look for this speaker on a nearby BT device, and pair to it if you so desire.





4. Done with Sony Cube Speaker Reset !

Reset is now done. So you may now sell or gift the Sony cube, or pair it again with your favorite Bluetooth devices.

After this reset, the speaker no longer automatically pairs with any previously connected Bluetooth device. Thus, to restore this auto pairing, you manually pair the cube with a device first. Then any time that both speaker and that device have Bluetooth turned on, and they’re in range of one another, pairing automatically takes place once more.

Related Posts to Sony Cube Speaker Reset

  1. JBL Pulse 3 Reset Instructions
  2. Logitech Roll Reset Instructions
  3. Echo Input Reset Instructions
  4. Sony Bluetooth Speaker Reset Instructions
  5. Belkin Wireless Extender Reset Instructions

Other Posts About the Sony Cube Speaker

  1. Sony Cube Speaker Charging Instructions
  2. How to Make Sony Cube Speaker Discoverable

References for Sony Cube Speaker Reset Instructions

  1. Sony Cube Speaker Support Page at Sony.com

Revision History

  • 2022-07-14: First published.
%d bloggers like this: