The iPad Bluetooth Settings page, showing the Sony SRS X5 as Connected.
This post provides Sony SRS X5 Bluetooth pairing directions, to link it with common wireless devices. E.g. These include the iPhone and the iPad line of Apple phones, media players, and tablets. You can also pair this speaker with Android devices using a similar procedure.
With your SRS X5 powered OFF (power lamp is dark), run through these instructions to pair it to your source BT mobile device. We’re using an iPad Air tablet for this demo.
Firstly, press the Home button to reveal the smart device’s Home screen.
We found ours on the second page of the Home screen, as we see next.
Thirdly, touch the Settings app icon.
The smart device then shows the first page of its settings, as shown in the next step.
Our Bluetooth Settings screen displays as follows. Note that our Bluetooth is enabled here. But since our SRS X5 is currently OFF (is not in Bluetooth discovery mode), it does not show up in the BT devices list. Also, we don’t see it since we’ve never paired this speaker with our mobile device before.
Thus, turn on the X5 by quickly pressing its Power button. See this, pointed at by the green arrow, in the next picture.
The speaker then powers on, and its status lamp nearby glows green, as we see in the next picture.
But since our iPad does not know about this speaker, the X5 will not pair with it automatically.
Now, to see your speaker on your device, place it into Bluetooth discovery mode. To make that happen, press and hold the Pairing button. It’s in the front row of buttons, second button from the left.
Release the button when the speaker makes two high beep sounds, and the Pairing lamp starts fast flashing white.
This takes one to three seconds to enter pairing mode.
See the screen shot next. We found the test speaker, as pointed at by the green arrow.
Tap the listed speaker in the discovered devices list.
Your mobile device then connects with the SRS X5.
E.g. The source device’s Bluetooth Settings screen might then change to look something like the following. Note the now-connected SRS X5 entry, as pointed at by the green arrows in the next screenshot.
At last, we have now successfully paired the X5 with with a common mobile tablet device.
Here we cover the Amazon Echo Dot 3rd generation power cable specs. This is the…
The Sony SRS XB32 speaker charging indicator is a small LED light in the back…
Here we cover the Echo Dot 3rd generation power adapter specs. This is the wall…
You must know how to set the Echo speaker to pairing mode to connect it…
The JBL Go 2 speaker by Harman Kardon is a low power, hand-held style unit…
Shows how to fix Honeywell wireless thermostat connection failure issues. You might see these on…