We describe here the Sony SRS X5 wireless speaker reset instructions to return the unit to its default settings. Furthermore, doing this erases any earlier synced Bluetooth devices from memory. We might want to clear these to prevent this speaker from pairing to any nearby BT devices. Also, you would best reset your speaker to get it ready for sale or re-gifting, or to stop it from pairing with devices you no longer wish it to connect with.
Sony SRS X5 Reset Instructions, Step by Step
1. Turn ON the X5
Press and release the Power button for a half-second or so. Find this button location in the next picture.
Then, the status light comes on. This light we find on the top of the speaker, just behind the Power button.
Note that they speaker makes no sound at this point.
2. Press and Hold the Volume DOWN and Power Buttons
Both of these buttons we find on the top of the speaker, right of center, close to the back edge, as called out in the next picture. The Volume Down button is in the leftmost position in this row, while the Power button is in the rightmost position.
Since one of these buttons is for power, you need to first touch the Volume Down button by itself, Then, after a half-second, while continuing that touch, press and hold the Power button. Doing it this way prevents accidently powering down the speaker before it has a chance to reset.
Then, hold both buttons in until all lights go out, and the speaker shuts down. This takes around five seconds as the speaker master resets.
Next, the speaker powers OFF, and the Power and Pairing lamps go dark. Note that on this speaker, there is no power-down sound when the reset finishes.
You may release the buttons when all the lights go dark.
3. Check That your Sony SRS X5 Did Reset
Next, power on the X5 once more, as described in step 1 above.
Note that after a reset, this speaker comes up in pairing mode. The Pairing lamp blinks in fast white blips to tell you this. This is a signal for you to look for this speaker on a nearby BT device, and pair to it if you so desire.
4. Done with Sony SRS X5 Reset !
The speaker reset is now complete. So you may now sell or gift the unit, or pair it again with your favorite Bluetooth devices.
After resetting, the speaker no longer automatically connects with any previously paired Bluetooth device. Thus, to restore this auto linking, you manually pair the X5 with a device. Then after that, any time that both speaker and that device have Bluetooth turned on, and they’re near to each other, pairing would automatically take place once more.
Other Sony SRS X5 Posts
Related Posts to Sony SRS X5 Reset Instructions
References
Revision History
-
- 2023-04-24: First published.