Picture of the Sony SRS XB01 speaker top and front.

Sony SRS XB01 Reset Instructions

Gives here the Sony SRS XB01 reset instructions, to return the unit to its default settings. Resetting restores the XB01 SRS tiny speaker to default out-of-box state. Plus, resetting erases any earlier paired BT devices from memory. Erasing these halts this speaker from pairing to any nearby Bluetooth devices. Also, you might factory reset this speaker to get it ready for sale or re-gifting, or to stop it from pairing with devices you no longer wish it to link with.

Sony SRS XB01 Reset Instructions, Step by Step

1. Turn ON the XB01

Press and release the Power button for a half-second or so. Find this pushbutton as shown in the next picture.

Picture of the Sony SRS XB01 speaker -Power- button.
The Sony SRS XB01 speaker -Power- button.

Then, the status light comes on, as we see next.  This light we find on upper left corner of the front grill.

Picture of the glowing -Status- light. Sony SRS XB01 Reset.
The glowing -Status- light.

The speaker might make a ding-dong beep sound when it powers up, if it links with a nearby Bluetooth device.  But should it not connect, then it makes no sound at all when booting. But whether it pairs or not, this reset routine works the same way, as follows.





2. Press and Hold the Volume DOWN , Volume UP, and Power Buttons at the Same Time

Find these buttons as shown next.  All three of them we find on the top of the speaker, as the next picture shows.

Picture of the -Volume DOWN-, -Volume UP-, and -Power- buttons.
The -Volume DOWN-, -Volume UP-, and -Power- buttons.

The XB01 then enters reset mode after a a couple seconds delay.

Then the speaker powers OFF, and the status lamp goes out, as we see next. Note that on this speaker, there is no power-down sound. You may release the buttons at this point.

Picture of the dark -Status- light on the speaker.
The speaker, displaying a dark -Status- lamp.

3. Check that your Sony SRS XB01 Did Indeed Reset

Next, power on the XB01 again, as described in step 1 above.

Note that after a reset, this speaker comes up in pairing mode. The Status lamp blinks blue rapidly to tell you this.  This is a signal for you to check for this speaker on a nearby BT device, and sync to it if you so desire.





4. Done with Sony SRS XB01 Reset Instructions !

The reset is now complete. So you may now sell or gift the speaker, or pair it again with your favorite Bluetooth devices.

Note that after the reset, the speaker no longer automatically syncs with any previously paired Bluetooth device. Thus, to restore this auto pairing, you manually pair the XB01 with a device. Then after that, any time that both speaker and that device have Bluetooth turned on, and they’re in range of each other, pairing automatically occurs once more.

Related Posts to Sony SRS XB01 Reset

    1. Sony Cube Speaker Reset Instructions
    2. JBL Pulse 3 Reset Instructions
    3. Logitech Roll Reset Instructions
    4. Echo Input Reset Instructions
    5. Sony Bluetooth Speaker Reset Instructions

Other Posts About the Sony SRS XB01

    1. How to Turn Off the Sony SRS XB01
    2. Sony SRS XB01 Charging Instructions
    3. How to Connect Sony SRS XB01 to iPhone
    4. How to Factory Reset the Sony SRS XB01 Speaker
    5. How to Make Sony SRS XB01 Discoverable

References for Sony SRS XB01 Reset

    1. Sony SRS XB01 Speakers Support Page at Sony.com

Revision History

    • 2022-07-14: First published.