We give here the Sony SRS XB32 Extra Bass speaker factory reset instructions for returning the speaker to its default factory settings. Factory resetting restores the 32 to default fresh-out-of-the-box state. Plus, it deletes any earlier paired Bluetooth devices from memory. This stops the speaker from pairing to any nearby Bluetooth devices. Furthermore, you might factory reset to get it ready for sale or re-gifting, or to stop it from pairing wirelessly with devices you no longer wish it to connect with.
Sony SRS XB32 Factory Reset, Step by Step Instructions
1. Turn the Speaker ON
Press and release the Power button for a half-second or so. Find the Power button as shown in the next picture.
Find the Power button, as shown in the last picture above.
Then, the status light comes on, as shown next.
The speaker may make a two-tone sound when it boots, to let you know that it has paired, should it link to a nearby device. Or it may play no sound if it does not. But whether the unit pairs or not though, this factory reset routine works the same way, as follows.
2. Press and Hold the Power and Volume DOWN Buttons At the Same Time
Find these buttons as shown next. They are both on the top button panel, as we point out in the next picture.
The XB32 then enters the factory reset program in its onboard software.
Then after a few seconds, the speaker powers OFF, and the status lamp goes dark, as shown next. So release the buttons at this point. Note that on the SRS XB32, there is no power-OFF sound.
3. Check that your Sony SRS XB32 Speaker Did Indeed Factory Reset
Next, power on the unit again, as detailed in step 1 above.
Note that after factory reset, the XB32 comes up in discovery mode. The Pairing Mode lamp quickly flashes blue to let you know this. It should not connect with any device fresh after a factory reset.
E.g. See this in the next picture.
This is a signal that you may then look for this speaker on a nearby BT device, and pair to it if you so desire.
4. Done with Sony SRS XB32 Factory Reset !
The factory reset is now finished. So you may now sell or gift the 32, or pair it again with your favorite Bluetooth devices.
After a factory reset, this speaker no longer automatically links with any Bluetooth device. So to restore auto joining, you manually pair it with a device. Then after that, any time that both speaker and that device have Bluetooth turned on, and are in range, pairing would automatically take place once more.
Related Posts to Sony SRS XB32 Factory Reset
Other Posts About the Sony SRS XB32
References for Sony SRS XB32 Factory Reset
Revision History
-
- 2021-09-28: First published.