Picture of an Echo Dot 4th Gen clock speaker in front of a Sony SRS XB33 light show and Bluetooth speaker.

Sony SRS XB33 Power Output

The SRS XB33 Sony Bluetooth speaker is a small to medium power, desktop wedge shaped unit with plenty of output power in its specs to fill a typical room with tunes.

But what does the power output a Bluetooth speaker has tell you about it?  Firstly, the watt is a measure of how much power the speaker consumes or outputs.  Plus, this metric is a handy comparison measure. E.g. Generally speaking, speakers with more power output tend to play louder than those with less.  They cost more, have bigger batteries and chargers, along with larger drivers.  They offer greater dynamic range, have a deeper bass response, and stereo versions and offer typically a bigger soundstage to listeners.

Picture of the Sony SRS XB33, connected to charger and charging.
The Sony SRS XB33, connected to charger and charging.

Thus in general, the more powerful the speaker, the better it sounds, even at lower volume. You get better clarity due to higher accuracy reproduction of the bass, midrange, and treble content of the music. More available power could mean less clipping distortion too. So, the speaker’s power output is a primary indicator of speaker quality and performance, and as such, is of great interest to audiophiles and novice listeners alike.

In this case, the Sony SRS XB33, as a portable BT speaker, is a decently hefty model for its size.  Its gobs of power output can fill a small to medium size room with music. See below for details on its power output.





Sony SRS XB33 Power Output: Details

The power values here are given in watts.

    1. Total Audio Output Power on AC (RMS): 16.
    2. Total Peak Audio Power (both channels): 22.6.
    3. Audio Output Power on Battery: Decreases as battery discharges.
    4. Output Power per Channel: 8 RMS.
    5. Battery Capacity: 19.24 watt-hours (7.4 volts, 2.6 amp-hours).
    6. USB-C Charger Power: 15 (5 volts at 3 amps).
    7. Light Power: Less than 2.
    8. Bluetooth Standby Mode Power: 0.2.
    9. Power Bank Output Power: 5 (5 volts at 1 amp max).

Notes on Sony SRS XB33 Power Output

    1. The system tries to conserve battery power as the battery get close to total depletion.  The XB 33 does this by reducing the audio output power somewhat.
    2. The SRS XB33 speaker may not input enough enough power from a USB-C power adapter to keep the battery from discharging when playing at full volume, depending on what you’re playing on it.  So it’s possible that even with the unit plugged in, you could still see it shut down.  Thus on the (rare) occasions that this occurs, just stop playing the 33 for an hour or two, to let it build up some reserve power while charging. Then, fire it up again for continued party enjoyment.

Other Sony SRS XB33 Posts

    1. Sony SRS XB33 Pairing Instructions
    2. How to Check Sony SRS XB33 Battery Life
    3. How to Connect Sony SRS XB33 to iPhone
    4. Sony SRS XB33 Software Update Instructions
    5. Sony SRS XB33 Charging Instructions

Related Posts to Sony SRS XB33 Power Output

    1. Sony SRS XB20 Power Output
    2. Sony SRS X2 Power Output
    3. Sony SRS XB31 Power Output
    4. Sony SRS X11 Power Output
    5. Sony SRS XB22 Power Output

References

    1. Official Sony SRS XB33 Support Page
    2. Where to Buy the Sony SRS XB33

Revision History

    • 2023-04-03: First published.