Picture of the Sony SRS XB33 speaker, connected to charger and charging.

Sony SRS XB33 Reset Instructions

We give Sony SRS XB33 speaker reset instructions here to return this wireless speaker to its default factory settings. Resetting restores the XB33 to fresh-out-of-box state. Plus, it takes away any prior paired Bluetooth devices from memory. Clearing these stops this speaker from pairing to any nearby BT devices. Also, you might reset to get the unit ready for sale or re-gifting, or to stop it from syncing with devices you no longer wish it to connect with.

Sony SRS XB33 Reset Instructions, Step by Step Routine

1. Turn the Speaker ON

Press and release the Power button for a half-second or so. Find the Power button as shown in the next picture.

The -Power- button on the Sony SRS XB33 speaker. Sony SRS XB33 Reset.
Sony SRS XB33 speaker -Power- button.

Then, the status light lights up green, as we see next.

Picture of the -Power- lamp lit up.
The -Power- lamp lit up.

The speaker may make a ding-dong tone sound as it boots.  It may also announce that it has paired, should it connect to a in-range device. Or it may make no sound if not.  But whether the unit pairs or not though, this hard reset routine works the same way, as follows.

2. Press and Hold the Pairing and Volume DOWN Buttons Together

Find these buttons as shown next.  They are both on the top button panel, as we point out in the next picture.

The -Bluetooth Pairing- and -Volume DOWN- buttons.
The -Bluetooth Pairing- and -Volume DOWN- buttons.

The XB 33 then enters the reset process.

Next, after a few seconds, the speaker powers OFF. The status lamp goes dark, as shown next. Plus, note that there is no powering-OFF sound when the unit powers down.

The dark -Power- light.
The dark -Power- lamp.

3. Check that your Sony SRS XB33 Did Indeed Reset

Next, power on the unit again, as detailed in step 1 above.

Note that after reset, the 33 comes up in discovery mode. The Pairing Mode lamp double blinks blue to let you know this.

The glowing -Bluetooth Status- light.
The -Bluetooth Status- lamp glowing.

This signifies that you may then look for this speaker on a nearby BT device, and pair to it if you want.

4. Done with Sony SRS XB33 Reset !

Resetting is now done. So you may safely sell or gift the speaker, or pair it again with your favorite Bluetooth devices.

After reset, the XB33 no longer automatically syncs with any previously joined Bluetooth device. Thus, to restore auto pairing, you manually connect it with a device. Then, any time that both speaker and that device have Bluetooth turned on, and they’re near to each other, pairing automatically takes place once more.

Related Posts to Sony SRS XB33 Reset

    1. Sony SRS XB32 Reset Instructions
    2. Sony SRS XB31 Reset Instructions
    3. SRS XB23 Sony Reset Instructions
    4. Sony SRS XB22 Reset Instructions
    5. Sony SRS XB21 Reset Instructions

Other Posts About the Sony SRS XB33 

    1. Sony SRS XB33 Charging Instructions
    2. How to Turn Off the Sony SRS XB33 Speaker
    3. Sony SRS XB33 Hard Reset Instructions
    4. Sony SRS XB33 Buttons Explained
    5. How to Pair Sony SRS XB33 Wireless Speaker

References for Sony SRS XB33 Reset

    1. Sony SRS XB33 Portable Speaker Product Page at Sony.com

Revision History

    • 2022-07-17: First published.