Picture of the right front of the Sony SRS XB40 speaker

Sony SRS XB40 Factory Reset

Gives you Sony SRS XB40 factory reset directions to restore this BT speaker to its default settings.  Plus, it clears out any earlier paired Bluetooth devices from its memory. This stops the speaker from pairing to any nearby Bluetooth devices. Furthermore, you might factory reset the unit to get it ready for sale or re-gifting, or to stop it from pairing wirelessly with devices you no longer wish it to connect with.

Sony SRS XB40 Factory Reset, Step by Step

1. Turn ON the XB40

Press and release the Power-Pairing button for a half-second or so. Find that button as we see in the next picture.  It’s on the top, closest to the right edge of the speaker.

Picture of the dark Power button on the Sony SRS XB40 speaker.
The dark Power button on the Sony SRS XB40 speaker.

Then, the Power-Pairing button starts glowing, as we see next.

Picture of the glowing Power button.
The glowing Power button.

The speaker may make a two-tone sound as it starts, to announce that it has paired, should it sync to a nearby device. Or it may play no sound at all if it does not.  But whether the unit connects or not though, this factory reset routine works the same way, as follows.

2. Press and Hold the Power-Pairing and Volume DOWN Buttons at the Same Time

Find these buttons as shown next.  They are both on the top button panel.

Picture of the Volume Down and Power-Pairing buttons on the Sony SRS XB40 speaker.
The Volume Down and Power-Pairing buttons on the Sony SRS XB40 speaker.

Since one of these buttons is for power, you need to first press the Volume Down button by itself,  Then, after a half-second, while holding that one in, press and hold the Power button as well.  Doing it this way prevents accidently powering down the speaker before it has a chance to reset.

The XB40 then enters its factory reset program.

Then after about a few seconds, the speaker powers OFF, and the Power-Pairing button goes dark, as we show next. So release the buttons now. Note that on the SRS XB40, there is no power-down sound.

Picture of the top of the speaker when powered down.
Top view of the speaker when powered down.

3. Check that Sony SRS XB40 Factory Reset Worked

Next, power on the unit again, as detailed in step 1 above.

Note that after this factory reset, the XB40 comes up in discovery mode. The Pairing Status lamp quickly blinks white to let you know this. But the speaker should not link with any device fresh after a factory reset.

E.g. See this in the next picture.

Picture of the Pairing light flashing white.
The Pairing lamp blinking white.

This is a signal that you may then look for this speaker on a nearby BT device, and pair to it if you so desire.





4. Done with Sony SRS XB40 Factory Reset !

This routine is now complete. So you may now sell or gift the speaker, or pair it again with your favorite Bluetooth devices.

After a factory reset, the XB40 no longer automatically links with any Bluetooth device. So to restore auto joining, you manually pair it with a device. Then after that, any time that both speaker and that device have Bluetooth turned on, and are in range, pairing would automatically take place once more.

Other Posts About the Sony SRS XB40

    1. Sony SRS XB40 Charge Time
    2. SSRS XB40 Sony Bluetooth Speaker Reset Procedure
    3. Sony SRS XB40 Charging Instructions
    4. How to Know if Sony SRS XB40 is Charging
    5. How to Connect to Sony SRS XB40 Wireless Speaker

Related Posts to Sony SRS XB40 Factory Reset

    1. Sony SRS XB30 Factory Reset Instructions
    2. SRS X3 Sony Factory Reset Instructions
    3. Sony SRS X2 Factory Reset Directions
    4. JBL Go 2 Factory Reset Instructions
    5. Go JBL Speaker Factory Reset Instructions

References for Sony SRS XB40 Factory Reset

    1. Sony SRS XB40 BT Portable Speaker Support Page at Sony.com

Revision History

    • 2022-10-30: First published.