Right front view of the Sony SRS XB43 Extra Bass speaker.

Sony SRS XB43 Software Update Instructions

Here, we detail the software update procedure for the Sony SRS XB43 wireless speaker. This routine can take ten (10) to fifteen (15) minutes depending on the speed of your internet connection, source device used to update the speaker, distance between speaker and that device, Etc. Plus, you cannot pull the update once you install it. That is, you’ll be unable to return to the prior software version after you finish this upgrade. So, be sure that you indeed want the update, and have thought through all ramifications before proceeding.

Sony SRS XB43 Software Update: Preparations

You’ll need the following items:

    • High speed internet connection,
    • Bluetooth enabled mobile device,
    • The Sony Music Center app that runs on said mobile device,
    • the Sony SRS XB43 BT speaker you’re updating.
    • Compatible power adapters and charge cables for your speaker and mobile device.

Summary for Sony SRS XB43 Software Update Directions

Next, do the following to update the speaker. In short…

    1. Connect your mobile source device to the internet.  We suggest using WiFi for this work, and not your cellular connection.
    2. Install the Sony Music Center app if you haven’t already.
    3. Then, plug your XB43 and your mobile device to AC power. Why? Because we don’t want either of their batteries going dead while updating the software. In fact, a low battery could leave damaged software in the speaker’s memory. This could, and probably would, brick the speaker. This would then likely render the unit useless and non repairable. So once again, connect the speaker to power before continuing !
    4. Disconnect any other Bluetooth speakers and devices from your source device for this process.
    5. Then, power up your speaker and source device, if not already running.
    6. Next, pair that device with the XB43.
    7. Run the Sony Music Center app. The app should then find your speaker and display the home screen for the XB43, showing that a software update is available.
    8. Follow the on-screen instructions to complete the update.




Sony SRS XB43 Software Update, Step by Step Details

1. Connect the XB43 and your Mobile Device to AC Power

We connected ours to an AC outlet using a common USB power supply, as well as a common micro USB to USB-A cable. E.g. See this in the next picture.

Picture of the charging Sony SRS XB43 Bluetooth speaker.
The charging Sony SRS XB43 Bluetooth speaker.

You’ll know that the speaker is getting external power if you see the CHARGE light glowing orange.

2. Pair the Speaker with your Source Device

Connect the speaker to your phone / tablet where you will run the update. Here’s an example screenshot of the XB43 connected to a test iPad.

-Bluetooth Settings- page on iPadOS, showing the Sony SRS XB43 as Connected.
iPadOS -Bluetooth Settings- page, showing the Sony SRS XB43 as Connected..

Now keep both the speaker and your mobile device powered up and close to each other throughout the update, lest the update fail and result in a broken speaker.

3. Find the Sony Music Center App on your Source Device

We made a folder for all of Bluetooth speaker apps and put the Sony Music Center app in there on our test iPad, as you see in the next picture.

Screenshot of the Sony Music Center app icon on iPadOS.
The Sony Music Center app icon on iPadOS.

4. Run the Sony Music Center App to Continue with the Sony SRS XB43 Software Update

As the app runs, it scans the host device running it for compatible Sony speakers.  Wo, the app needs a brief period to find the XB43. But eventually, it does so, and displays its status screen, as we show  next.

If the speaker does not appear in the app after thirty seconds or so, move it closer to your mobile device. Next, close the Music Center app, and then run it again.

Note the tan bar on the XB43’s home screen.  This appears only when a software update is available for this speaker.

Screenshot of Sony Music Center app, displaying the SRS XB43 Home page with a speaker update available, showing the More Info button.
Sony Music Center app, displaying the SRS XB43 Home page with a speaker update available, showing the More Info button.

Note that if there are no firmware updates pending for the XB43, then you will see no brown bar. This situation we show in the next picture.

Screenshot of the SRS XB43 speaker Home page, with no software update pending.
The SRS XB43 speaker Home page, with no software update pending.

5. Tap the More Info Button Inside the Brown Update Bar

Tapping the More Info button brings up the Software Information screen, as follows.

Screenshot of the software information page for version 4800 of the Sony SRS XB43 software.
The software information page for version 4800 of the Sony SRS XB43 software.

6. Tap the OK Button

Tapping the OK button may bring up the following screen if you haven’t followed the above directions, and plugged your speaker into external power.

Screenshot of The Connect Speaker to Power Supply window.
The Connect Speaker to Power Supply window.

In fact, we suggest that you fully charge both speaker and the smart device before proceeding with this update.  Doing so protects your XB 43 from a corrupt software upload in the event of a prolonged power outage, where the batteries could go dead before the update finishes.  Also, as a further precaution, once you fully recharge both devices, please leave both of them connected to external power until the update finishes.

Once speaker and smart device finish charging, tap the OK button on the Connect Speaker to Power Supply   window. That should then take you back to the previous page once again, as follows.

Screenshot of the software information page for version 4800 of the Sony SRS XB43 software.
Back at the software information page for version 4800 of the Sony SRS XB43 software.

Or, if you quit the app, go ahead and restart it and repeat the above steps.  This time, you should not get the Connect Speaker to Power Supply page. But instead, you will see the Software Information page that we see in the last picture.





7. The Software Update of the Sony SRS XB43 Speaker Begins

The updating then starts, as we show in the following screenshots. The Music Center app first downloads the new software package.

Screenshot of the Sony Music Center app downloading the new program, and at 6 percent done.
The Sony Music Center app downloading the new program, and at 6 percent done.

Once the app downloads the package, it unpacks and transfers it to the XB43 as the next pictures show.

Additionally, during the transfer to the speaker, the Power lamp on it pulses in groups of four pulses then a pause.  E.g. Pulse-pulse-pulse-pulse-pause, pulse-pulse-pulse-pulse-pause,…  During this time, all other lamps on the speaker are OFF.

Picture of the Sony SRS XB43 party Speaker power lamp blinking.
Sony SRS XB43 party Speaker power lamp flashing.

7a. The Software Update Continues at Thirty Percent Complete

Now as we see in these screenshots, the Sony Music Center app displays a  progress line, that gradually gets more brown as the update proceeds.

Screenshot of downloading the new software, and at 30 percent done.
Downloading the new software, and at 30 percent done.

7b. The Sony SRS XB43 Software Update Process is Now at Seventy Percent Complete

Screenshot of transferring the new software to the speaker, and at 70 percent done.
Transferring the new software to the speaker, and at 70 percent done.

Now we’re probably about five minutes into the update. Indeed this process takes a relatively short time as compared to some of the other speaker models we’ve tested.

7c. Now at Ninety-Nine Percent Done

The next screen shows that the software transfer and update to the speaker have almost finished (99 percent done). E.g. The progress bar is practically all brown now.

Screenshot of the Sony Music Center app transferring the software to the speaker, and at 99 percent done.
The Sony Music Center app transferring the software to the speaker, and at 99 percent done.

7d. Software Update on the XB43 Begins

Now that the new program has been transferred from your device to the speaker, the update process on the XB43 begins when you see this page.

Screenshot of the Software Update Has Started page. The OK button is highlighted.
The Software Update Has Started page. The OK button is highlighted.

7e Tap the OK Button

Touching the OK button takes you to the Speaker & Group page, where you see a list of previously connected speakers that the app knows about.  Note that all are grayed out.  So none are connected to the app during the xb43 update process.

Screenshot of the Sony Music Center app, showing the devices list page with no devices currently connected to it.
The Sony Music Center app, showing the devices list page with no devices currently connected to it.

8. Wait for the Sony SRS XB43 to Shut OFF After Updating its Software

While the speaker updates itself, its Power lamp flashes green.

Picture of the Sony SRS XB43 party Speaker power lamp blinking.
Sony SRS XB43 speaker power lamp flashing.

Then after a minute or two, once the 43 finishes updating, the Power light goes dark.  No more blinking.

Picture of the dark power light.
The dark power lamp.

9. Press the Power Button To Boot the Speaker Again

Press the Power button to turn the 43 on again.

Picture of the Sony SRS XB43 speaker in OFF state, showing the -Power- button.
Sony SRS XB43 speaker in OFF state, showing the -Power- button.

The XB43 should again pair with your mobile device where you’re running the Sony Music Center app. The Power lamp turns solid green, and the Pairing light also glows steadily blue once the speaker has again linked to your mobile device.

Now after the XB43 reconnects, the Sony Music Center app discovers that your speaker has come back online, and thus, displays an update-complete message, as follows.

Screenshot of the Software 4800 Update Complete screen, with the OK button highlighted.
The Software 4800 Update Complete screen, with the OK button highlighted.

10. Press the OK Button Back in the Sony Music Center App

With your speaker successfully paired to the app again, press the  OK  button, as shown in the last screenshot.

The app then displays the Sony SRS XB43 home screen once again. But this time, note that there’s no longer the brown bar, as we see next. This means that the updating of the software worked, and that the speaker is now running the current program version.

Screenshot of the SRS XB43 speaker Home page after the software update.
The SRS XB43 speaker Home page after the software update.

11. Done with Sony SRS XB43 Speaker Software Update !

You’re now finished updating the software to the current version in your Sony SRS XB43 BT speaker.

Related Posts to Sony SRS XB43 Software Update

    1. Sony SRS XE200 Software Update Instructions
    2. SRS XE300 Sony Speaker Software Update Instructions
    3. Sony SRS XG300 Software Update Instructions
    4. SRS XG500 Sony Speaker Software Update Instructions
    5. Sony SRS XP500 Software Update Instructions

Other Posts About the Sony SRS XB43 BT Speaker

    1. How to Tell if Sony SRS XB43 is Charging
    2. Sony SRS XB43 Charge Time for a Full Recharge
    3. Sony SRS XB43 Bluetooth Pairing Instructions
    4. Charger Type for the Sony SRS XB43 Speaker
    5. Sony SRS XB43 Not Charging, How to Fix

References

    1. Sony SRS XB43 Portable BT Speaker Product Page on Sony.com

Revision History

    • 2022-12-19: First published.