Picture of the Bluetooth pairing / discovery button on the Sony SRS XG500 speaker.

Sony SRS XG500 Bluetooth Pairing

This post gives Sony SRS XG500 Bluetooth pairing steps for this Extra Bass boombox speaker, to connect it with common Bluetooth devices. E.g. Including the iPhone, iPod Touch, and the iPad line of Apple phones, media players, and tablets along with Android devices as well.

Sony SRS XG500 Bluetooth Pairing, Step by Step

With your SRS XG500 speaker switched OFF (all top panel lams are dark), run through these directions to pair it to your source Bluetooth device. E.g. We use an iPad Air 3 tablet for this demo.

1. Go to the Home Screen on your Source Device

Firstly, press the Home button to reveal the smart device’s Home screen.

2. Find the Settings App

We found ours on the second page of the Home screen, as shown next.

Picture of an iPad Home screen, with the Settings app highlighted by an arrow. Sony SRS XG500 Bluetooth Pairing.
iPadOS Home Screen with Settings App Highlighted

3. Bring up the Settings App

Thirdly, touch the Settings app icon.

The smart device then shows the first page of its settings, as shown in the next step.





4. Go to the Bluetooth Settings  Page to Continue with Sony SRS XG500 Bluetooth Pairing

Our Bluetooth Settings screen displays as follows. Note that our Bluetooth is ON here. But since our 500 is currently powered OFF (and so, is not in pairing mode), it does not show up in the Other Devices list. Also, we don’t see it in the My Devices list since we’ve never paired this speaker with our mobile device before.

Screenshot of the iPadOS -Bluetooth Settings- page showing nothing discovered
iPadOS -Bluetooth Settings- page showing nothing discovered

5. Turn On your Sony SRX XG500 Speaker

Turn on the 500 by fast pressing its  Power  button. See this, pointed at by the green arrow, in the next picture.

The -Power- button on the Sony SRS XG500 speaker.

The speaker then boots, and its status lamp glows green, as we see in the next picture.

But since our iPad does not know about this speaker, the SRS XG500 will not pair with it automatically.

Picture of the -Power- lamp on the Sony SRS XG500 speaker, glowing green.
The -Power- lamp on the Sony SRS XG500 speaker, glowing green.

6. Put the SRS XG500 into Bluetooth Pairing Mode

Then, to see this BT speaker on your device, place it into pairing mode. To do that, press the Pairing button, and release after a quarter second.

Find the Pairing button as we see in the next picture, pointed at by the green arrow.

Picture of the Bluetooth pairing / discovery button. Sony SRS XG500 Bluetooth Pairing.
The Bluetooth pairing / discovery button.

Then the speaker emits a rise-fall beep.  Also, the Bluetooth Status lamp begins flashing in a pulse-pulse-pause-pulse-pulse-pause pattern.

The Bluetooth status light glowing blue on the Sony SRS XG500 speaker.




7. Find the Speaker on your Mobile Device to Continue with Sony SRS XG500 Bluetooth Pairing

See the screen shot next. We found our 500, as we point at with the green arrow.

Picture of the Sony SRS XG500 speaker, showing as discovered on the Bluetooth Settings page on iPadOS.
The Sony SRS XG500 speaker, showing as discovered on the Bluetooth Settings page on iPadOS.

8. Pair with your Speaker

Tap the listed speaker in the discovered devices list.

Your mobile device then pairs with the XG500.

E.g. The the mobile device’s Bluetooth Settings screen might then change to look something like the following.  Note the now-connected SRS XG500 entry, as pointed at by the green arrows in the next screenshot.

Screenshot of the Sony SRS XG500 speaker showing as connected on iPadOS.
The Sony SRS XG500 speaker showing as connected on iPadOS.

9. Done with Sony SRS XG500 Bluetooth Pairing !

At last, we have now successfully paired the XG500 Bluetooth speaker with a common mobile tablet device.  Thus, you can start enjoying your music on this speaker, which sounds much better than that in just about every smart phone or tablet.

Other Posts About the Sony SRS XG500 Boombox Speaker

    1. How to Pair Sony SRS XG500 to iPhone
    2. Sony SRS XG500 Firmware Update Instructions
    3. Sony SRS XG500 Battery Life
    4. How to Factory Reset the Sony SRS XG500 Speaker
    5. Sony SRS XG500 Not Charging, How to Fix

Related Posts to Sony SRS-XG500 Bluetooth Pairing

    1. Logitech Wonderboom Bluetooth Pairing Tips
    2. JBL Pulse 3 Bluetooth Pairing Instructions
    3. Sony SRS XB43 Bluetooth Pairing Tips
    4. Sony SRS XB41 Bluetooth Pairing Directions
    5. JBL Xtreme 3 Bluetooth Pairing Instructions

References for Sony SRS XG500 Bluetooth Pairing

    1. Sony SRS XG500 Official Product Page at Sony.com

Revision History

    • 2022-08-11: First published.