Picture of the front right of the Sony SRS XG500 Boombox Bluetooth speaker

Sony SRS XG500 Factory Reset Instructions

Gives Sony SRS XG500 factory reset directions to return this boombox speaker back to its default settings. E.g. Factory resetting returns sound mode and light settings to their fresh-out-of-the-box values.  Plus, resetting erases any earlier synced Bluetooth devices from memory. This stops this boombox from auto pairing to any nearby devices. Moreover, you might do this to get this speaker ready for sale or re-gifting, or just to stop it from pairing with devices you no longer wish it to connect with.





Sony SRS XG500 Factory Reset, Step by Step

1. Turn the Speaker ON

Press and release the Power button for a half-second or so. E.g. Find the Power button as shown in the next picture.

Picture of the -Power- button on the Sony SRS XG500.
The -Power- button on the Sony SRS XG500.

Find the Power button, as we see in the last picture above.

Then, the status light comes on, as shown next.

Picture of the -Power- lamp glowing green. Sony SRS XG500 Factory Reset.
The -Power- lamp glowing green.

The XG 500 may make a ding-dong tone sound when it powers up, should it pair to a nearby device. Or it may make no sound at all if it doesn’t.  But whether or not though, this factory reset to default state routine works the same way, as follows.





2. Press and Hold the Play-Pause and Mega Bass Buttons Together

Find these buttons as we see in the next picture.  Both of them are in the top button panel.

Picture of the Play-Pause and Mega Bass buttons.
The Play-Pause and Mega Bass buttons.

Hold these in until the speaker powers itself off, and all lights go dark.

After nearly 6 seconds, the XG500 powers down, and the status lamp and party lights (if enabled) all go dark, as we see next. Note that on this speaker, there is no shutdown sound.

Picture of the dark status and Bluetooth lamps.
The dark status and Bluetooth lamps, which are dark.

3. Check that the Sony SRS XG500 Factory Reset Did In Fact Work

Next, power on the speaker again, as detailed in step 1 above.

Note that after factory reset, the 500 comes up in discovery mode. The Bluetooth Status lamp blinks blue in a pulse-pulse-pause-pulse-pulse-pause sequence, to let you know this. E.g. See this in the next picture.

Picture of the Bluetooth status light blinking blue. Sony SRS XG500 Factory Reset.
The Bluetooth status light blinking blue.

This is a signal that you may then look for this speaker on a nearby BT device, and pair to it if you so desire.





4. Done with Sony SRS XG500 Factory Reset !

The factory reset is now complete. Thus you may now safely sell or gift this speaker. Or, pair it again with your Bluetooth devices.

Keep in mind that after a factory reset, the XG500 no longer automatically connects with any prior synced BT device. Thus, to set up auto pairing again, you first manually pair this speaker with a device. Then following that, any time that both speaker and device have Bluetooth enabled, and they’re near each other, pairing will automatically take place once more.

Related Posts to Sony SRS XG500 Factory Reset

  1. JBL Clip 2 Factory Reset Instructions
  2. Factory Reset Help for the JBL Clip 3 Speaker
  3. JBL Clip 4 Factory Reset Instructions
  4. Sony Bluetooth Speaker Factory Reset Directions
  5. JBL Flip 2 Factory Reset Tips

Other Posts About the Sony SRS XG500 Speaker

  1. Sony SRS XG500 Pairing Instructions
  2. How to Fix Sony SRS XG500 Not Charging Problem

References for Sony SRS XG500 Factory Reset

  1. Sony SRS XG500 Speaker Product Page at Sony.com

Revision History

  • 2022-08-11: First published.
%d bloggers like this: