Sony SRS X11 -Status- lamp glowing.
The Sony X11 Bluetooth cube speaker has a rudimentary battery level indicator LED on the lower back edge, as shown in the following pictures. This displays battery status. E.g. Whether it’s draining or charging, or whether it’s critically low or not when discharging. But it neither reads out charging progress, or how full the battery is at a given time while charging or draining. But it does blink orange when the battery hits a near-dead state. In this post, we describe how to read the battery indicator lamp on the X11.
The battery lamp is dark in the following situations:
With the charger disconnected, the X11 powered ON, and the battery having very little energy left, this light starts flashing orange. This means that the speaker will soon power off due to a dead battery and that you should put it on the charge soon.
This lamp also lights up solid orange (no flashing) as the X11 charges, as shown in the next picture. On this speaker, the light glowing is the only visual means of knowing that recharging is occurring. But it does not display how far along the recharging is.
Also note that this light should never blink on and off during recharging. If it does, then either your charger is not operating well, your USB cable is bad, or some problems exists inside the speaker.
As speaker charging continues, the light keeps glowing, But eventually, battery recharging finishes, and the lamp goes out to show this. It turns off when the speaker is not ON, and stays OFF when the X11 is ON.
When unplugged from the charger, what was the charging indicator becomes the battery charge left indicator. Well sort of. If it is dark when the speaker is ON, then the battery has some amount of play time left, although you cannot tell how much.
You can reset all of the smart speakers in the Google Home family. These include…
Here, we walk you through How to Install HP DeskJet 3630 Series Wireless Printer. In…
Perform this HP DeskJet 3632 setup routine to clear out the existing WiFi setting. You…
Gives the reset HP Deskjet 3632 procedure. Resetting restores the printer to factory default settings.…
If your HP 3630 series printer ever behaves strangely, do a factory reset. Or, when…
We've been avid mint tea drinkers for nearly two decades. So,we keep cordless kettles like…