Picture of the Sony SRS X2 Bluetooth speaker charging.

Sony X2 Charging Instructions

This piece covers Sony X2 speaker charging directions. Do this easily through the micro USB power in port, shown in the pictures below. Note that you can still play your X2 as it charges, without increasing the recharge time by much, as long as your charger is “beefy” enough.

Sony X2 Charging Summary

So to that end, pick a strong enough USB power adapter.

Next, connect a medium to high current USB cable between the speaker and that adapter (if you’re using a commercial charger with a USB-A output port).  Then, plug the charger into a working wall outlet.

Finally, after three (3) hours or so, your X2 finishes recharging.  So it’s ready to play once more for up to five (5) hours before needing another recharge.

Sony X2 Charging, Step by Step Instructions

1. Choose Correct Size AC or Car Adapter

The charger you use should provide 5 volts and at least 0.5 amps (2.5 watts). This option though yields much longer charging times.  But ideally, you want a 1.5 amp charger (7.5 watts) for the fastest recharging.  So here, we use a Key Power model HDD15-3-PD USB power delivery system.  Now as mentioned, this speaker needs roughly an amp and a half current to recharge fully in the shortest time.  So this charger supplies way more than enough power to do that job.

2. Power OFF the Unit to Continue with Sony X2 Charging

Note that the SRSX2 still charges when booted.  But depending on how much above-and-beyond recharging capacity your charger offers, the speaker might charge a bit faster when powered OFF.

3. Plug the Micro USB Cord into the X2

Then, plug the small end of the cable into the port on the back of the speaker, as we see in the next shot.

Picture of a micro USB charging cord inserted into the Sony X2 speaker.
A micro USB charging cord inserted into the Sony X2 speaker.

4. Plug the Other End of the Cable into your Charger Adapter

Next, connect the large end of the cord to the AC or car adapter if you’re using this sort of charger. For chargers with permanently attached cables, skip ahead to the next step.

5. Plug the AC Adapter into a Working Wall Receptacle, to Continue with Sony X2 Charging

Now that we connected the X2 and our adapter, we then plug the mains end of the adapter into a working AC outlet, as shown next. We plugged ours into a surge protecting power strip.

Picture of the speaker charging.
The speaker charging.

The CHARGE lamp lights up solid orange on the back of the speaker. And while no battery status gauge shows percentage of charge, this glowing lamp means that charging is occurring, as shown next.

Picture of the orange glowing CHARGE indicator lamp on the Sony X2 speaker.
The orange glowing CHARGE indicator light on the Sony X2 speaker.

6. Let the X2 Charge Until the Orange CHARGE Light Goes Dark

Full battery charging is complete when the solid glowing lamp turns off, as shown next.

Picture of the dark CHARGE indicator light.
The dark CHARGE indicator lamp.

7. Unplug the Micro USB Cord from the Speaker

8. Done with Sony X2 Charging Tips

We have now fully charged this little Sony speaker.

Finally, repeat this charging every five (5) hours of use to keep the battery in top condition for years.

Related Posts to Sony X2 Charging

Other Sony X2 Posts

    1. Sony X2 Reset Instructions
    2. Sony X2 Firmware Update Instructions
    3. How to Turn Off Sony X2

References

    1. Official Sony X2 Support Page

Revision History

    • 2023-03-07: First published.