This piece gives Sony XB 33 charging instructions. Recharge this speaker easily through the USB-C power in port, behind the water resistant door in the rear of the unit, shown in the pictures below. Note that you can still play your XB 33 mini speaker during charging, without upping the recharge time very much, especially if you are using a full-current USB charger.
First, the unit comes with a suitable USB-A to USB-C charger cable. But you must provide a strong enough USB adapter with a USB-A female connector, to plug that cord into. This particular speaker requires about 15 watts (5 volts at 3 amps max). Any full-current USB 2.0 adapter should work nicely here.
At any rate, once you choose the charger you will use, plug it into a working AC outlet.
Then after five hours, your XB 33 finishes charging. So it’s ready to play once more for up to twenty-four (24) hours before needing another recharge.
The charging adapter you use should offer 5 volts and at 3 amps (15 watts). Here, we use the Key Power model HDD15-3-PD USB power delivery system along with a thick-enough USB supply cable.
Use a fingernail, dime, penny, or small screwdriver to pry open the waterproof seal port cover on the XB 33.
See the opened power port compartment in the next picture. Be careful not to scratch the delicate seal around the inside edge of this door.
Prying open this door exposes the USB charging port inside, as shown in the last picture, pointed at by the green arrow.
Note that the 33 still charges when powered ON. But depending on how much above-and-beyond recharging amperage your charger supplies, the speaker might charge somewhat faster when not running. It will definitely charge faster when you’re not playing it at very high volumes.
Then, plug the matching end of your charging cable into the port, as we see in the next shot.
Warning: Only use either the DC input or the micro USB port for charging the speaker. Do not use the USB-A port near the right side in the port compartment. The larger connector is for power output only, for power bank purposes. So, feeding external power into THIS port will not only fail to recharge the battery in the XB 33, but could also damage the electronics inside the speaker.
If the supply you use has a removable cord, then be sure to connect the matching end of the USB power cable to the AC or car adapter you have.
Now that we connected the XB 33 and our adapter, we then plugged the mains end of the supply box into a working AC outlet, as shown next. We plugged ours into a surge protecting power strip.
The CHARGE lamp then lights up solid orange on the speaker. And while no battery status gauge shows percentage of charge, the glowing lamp means that charging is indeed occurring, as we see next.
Full battery charging wraps up when the CHARGE lamp turns off, as shown next.
Note that unless you seat the port cap correctly, water may flow into its power in / out ports. And, since water and electronics do not work well together, getting those connections wet might degrade the delicate contacts inside. So be sure to press this door closed with enough force to fully seat it, for maximum moisture protection.
We have now fully charged our XB 33 speaker.
Finally, repeat this recharging every (up to) twenty-four hours of play, to keep the battery in top condition for years to come.
You may wish Unlink Spotify Account from your Alexa Speaker because, You're giving an Echo…
In this post, we discuss the Unlink Spotify Account from Google Home Mini Smart Speaker…
In this post, we discuss the Unlink Spotify from Google Home Mini Smart Speaker procedure. …
In this post, we discuss the Unlink Spotify Account from Google Home Mini procedure. Now you…
Here, we detail the Unlink Spotify from your Google Home Account procedure. You may wish…
Here, we cover the Unlink Spotify from Google Home procedure. You may wish unlink (remove,…