Picture of the Sony SRS XB12 Bluetooth speaker, powered ON, showing the -Power- and -Volume Down- buttons highlighted.

Sony XB12 Factory Reset Instructions

Gives factory reset instructions for the Sony XB12 to set it back to its default settings. Factory resetting restores the XB12 to factory default state. Plus, it erases any earlier connected Bluetooth devices from its memory. Clearing these stops this unit from pairing to any nearby BT devices. Also, you might factory reset to get this speaker ready for sale or re-gifting, or to stop it from pairing with devices you no longer wish it to connect with.

Sony XB12 Factory Reset Instructions, Step by Step

1. Power UP the Speaker

Press the Power button for a half-second or so and then release it.

E.g. Find the Power button as we show in the next picture.

Picture of the Sony XB12 portable speaker powered OFF, showing the -Power- button.
Sony XB12 portable speaker powered OFF, showing the -Power- button.

Then, the status light comes on, as shown next.

Picture of the speaker, powered ON, showing the Status lamp lit.
The speaker, powered ON, showing the Status lamp lit.

The speaker may make a ding-dong tone sound when it powers up, should it pair to a nearby device. Or it may make no sound at all if it does not.  Yet whether paired or not, this factory reset to default state routine works the same, as follows.





2. Press and Hold the Volume DOWN and Power Buttons At the Same Time

Find these buttons as we show next.  Find both of them near the bottom of the speaker, as called out in the next picture.

Picture of the speaker, powered ON, showing the -Power- and -Volume Down- buttons highlighted.
The speaker powered ON, showing the -Power- and -Volume Down- buttons highlighted.

The XB12 then enters factory reset mode.

After a little pause, the speaker powers OFF, and the status lamp goes dark, as shown next. Note that on the SRS XB12, there is no power-down sound.

Picture of the Sony XB12 wireless speaker powered OFF, showing the dark Status lamp.
Sony XB12 wireless speaker powered OFF, showing the dark Status lamp.

3. Check that your Sony XB12 Did Indeed Factory Reset

Next, power on the unit again, as we detail in step 1.

Note that after a factory reset, the XB12 comes up in pairing / discovery mode. The Power lamp blinks blue rapidly to signify this.  This is a prompt that you may then look for this speaker on a nearby BT device, and pair to it if you so desire.





4. Done with Sony XB12 Factory Reset !

Factory reset is now done. So you may now gift or sell it, or link it again with your favorite Bluetooth devices.

After a factory reset, the XB12 no longer auto connects with any prior  paired Bluetooth device. Thus, to restore automatic pairing, you manually pair it with a device. Then after that, any time that both speaker and that device have Bluetooth turned on, and they’re near to each other, pairing would automatically take place once more.

Related Posts to Sony XB12 Factory Reset

    1. Sony XB33 Factory Reset Instructions
    2. Sony SRS X2 Factory Reset Instructions
    3. Sony XB01 Factory Reset Instructions
    4. JBL Flip Factory Reset Instructions
    5. Sony XB10 Factory Reset Instructions

Other Sony XB12 Posts

    1. How to Pair Sony XB12 with Alexa
    2. Sony XB12 Charging Instructions
    3. Sony XB12 Buttons Explained
    4. How to Make Sony XB12 Discoverable
    5. Sony XB12 Orange Light Stays On

References

    1. Official Sony XB12 Support Page
    2. Where to Buy the Sony XB12

Revision History

    • 2023-03-15: First published.