Sony XB13 Watts RMS

The back of the Sony SRS XB13 speaker box carton.

The SRS XB13 Sony Bluetooth speaker is a low power, one-person style, small unit with still enough watts RMS to fill a small room or personal space with strikingly full sounding music or speech.

But what do the watts a Bluetooth speaker has, tell you about it? Firstly, the watt is a measure of the amount of power the speaker draws and delivers. Plus, this metric is a handy comparison measure. E.g. Typically, speakers with more watts RMS tend to play louder than those with lower max wattages. The ones with greater power cost more, have bigger batteries and chargers, along with larger drivers. But they also offer more dynamic range, have a deeper bass response, and stereo models offer a bigger soundstage to listeners.

The Sony XB13 on the charge.

Thus in general, the more powerful the speaker, the better it sounds, even at low volume. You get better clarity due to higher accuracy reproduction of the bass, midrange, and treble pieces of the music. More extra watts could produce less clipping distortion as well. So, the speaker’s RMS watts number is a primary indicator of speaker quality and performance, and as such, is of great interest to audiophiles and novice listeners alike.

In this case, the Sony XB13, as a mini battery powered BT speaker, is a reasonably well powered model for its size. Its watts can immerse the area around a dining table with music. See below for details on its power output.

Sony XB13 Watts RMS: Details

1. Battery Capacity: 5.18 watt-hours (3.7 volts, 1.4 amp-hours).
2. Suggested USB Charger Power: 2.5 watts (5 volts at 0.5 amps).
3. Light Power: No party lamps on this speaker.
4. Power Bank Output Power: Not available on this speaker.
5. Total Audio Output Power on External Power (RMS): 5 watts.
6. Total Peak Audio Power: 7.07 watts.
7. Output Power per Channel: 5 watts RMS (There’s only one channel on this model).
8. Peak Output Power per Channel: 7.07 watts.

Notes on Sony XB13 Watts RMS

1. The SRS XB13 speaker may not input enough enough power from a USB power adapter to keep the battery from discharging when playing at full volume, depending on what you’re playing on it and the sort of charger you have. So it could be that even with the unit externally powered, you could still run the battery dead. Thus on the (rare) occasions that this occurs, just stop playing the 13 for an hour or so, to let it store up some reserve power as it recharges. Then, fire it up again for continued party enjoyment.