This post gives Sony XB30 Extra Bass speaker pairing directions by way of Bluetooth to common wireless BT devices. E.g. These include the Apple line of device like the iPhone, iPod Touch, and iPad. This routine also works for Android base devices as well, such as Samsung and LG phones, as well as Amazon Fire tablets.
With your SRS XB30 powered OFF (power button is dark), run through these directions to pair it to your source BT mobile device. We’re using an iPad Air computer for this demo.
Firstly, press the Home button to reveal the smart device’s Home screen.
We found ours on the second page of the Home screen, as shown next.
Thirdly, touch the Settings app icon.
The smart device then shows the first page of its settings, as shown in the next step.
Our Bluetooth Settings screen displays as follows. Note that our Bluetooth is enabled here. But since our speaker is currently not running (so it is not in Bluetooth discovery mode), it does not show up in the Bluetooth devices list. Also, we don’t see it since we’ve never paired this speaker with our mobile device before.
Turn on the XB30 by quickly pressing its Power-Pairing button. See this, pointed at by the cyan arrow, in the next picture.
The unit then powers up, and its Power-Pairing button glows white, as we in the next picture.
But since our tablet does not know about this speaker, the SRS XB30 will not pair with it automatically.
Now, to see your XB30 on your device, place it into Bluetooth discovery / pairing mode. So to accomplish that, press and hold the Power-Pairing button, and release when you hear the rising pitch beep sequence and the speaker announces, “Bluetooth pairing,” in a lady’s voice. Find the Power-Pairing button as pictured above.
In addition to the voice announcement, the Bluetooth Status lamp begins flashing fast white, as we see next.
See the screen shot next. We found our XB30, as pointed at by the green arrow.
Tap the listed speaker in the discovered devices list.
Your mobile device then pairs with the Bluetooth speaker.
E.g. The the mobile device’s Bluetooth Settings screen might then change to look something like the following. Note the now-connected SRS XB30 entry, as pointed at by the green arrows in the next screenshot.
At last, we have now successfully paired the XB30 BT speaker with with a common mobile tablet device.
Covers the JBL Go 3 Firmware Update Instructions. However, we know of no way to…
We show you here How to Factory Reset JBL Go 3 BT Speaker, to restore…
This post gives the procedure to Connect JBL Go 3 to Alexa. Since this pairing…
When the JBL Go 3 Speaker Won't Turn ON, this likely means one or more…
Explains How to Put JBL Go 3 Speaker in Pairing Mode. So first, turn on…
When the JBL Go 3 Won't Turn ON, this likely means one or more things…