Picture of all lamps dark on the Sony SRS XB30 speaker.

Sony XB30 Reset Instructions

Here we explain the Sony XB30 BT speaker reset routine, to restore it to factory default settings.  Master resetting restores the 30 to default state. Plus, it deletes any earlier paired Bluetooth devices from memory. This stops the speaker from automatically pairing to any nearby Bluetooth devices. Furthermore, you should reset the unit to get it ready for sale or re-gifting, or to stop it from pairing wirelessly with devices you no longer wish it to connect with.

Sony XB30 Reset, Step by Step Instructions

1. Turn ON the XB30

Press and release the Power-Pairing button for a half-second or so. Find this button as we see in the next picture. It’s the last one on the right in the top buttons panel.

Picture of the Power-Pairing button on the Sony XB30.
The Power-Pairing button on the Sony XB30.

Then, that button lights up, as we see next.

Picture of the glowing Power-Pairing button.
The Power-Pairing button glowing.

The speaker may make a two-tone sound as it starts, to announce that it has paired, should it sync to a nearby device. Or it may play no sound at all if it does not.  But whether the unit connects or not though, this factory reset routine works the same way, as follows.

2. Press and Hold the Power-Pairing and Volume DOWN Buttons Together

Find these buttons as shown next.  The Volume DOWN button is the third button in from the right, or the fifth position from the left. And the Power button is the last (biggest) button on the right.

Picture of the Volume Down and Power-Pairing buttons on the Sony XB30.
The Volume Down and Power-Pairing buttons on the Sony XB30.

Since one of these buttons is for power, you need to first press and hold the Volume Down button by itself,  Then, after a half-second, while holding that one in, press and hold the Power-Pairing button as well.  Doing it this way prevents accidently powering down the speaker before it has a chance to reset.

The XB30 then enters its reset program.

Next, after about five seconds, the speaker powers OFF, and the Power-Pairing button goes dark, as we see next. So release the buttons now. Note that on the SRS XB30, there is no power-down sound after a factory reset.

Picture of the top of the speaker, showing all lamps OFF.
Top view of the speaker, showing all lamps OFF.

3. Check that your Sony XB30 Did Indeed Reset

Next, power on the unit again, as detailed in step 1 above.

Note that after this reset, the XB30 comes up in discovery mode. The Pairing Status lamp quickly blinks white to let you know this.

Picture of the blinking Pairing lamp on the Sony XB30.
Sony XB30 Pairing lamp flashing.

This is a signal that you may then look for this speaker on a nearby BT device, and pair to it if you so desire.





4. Done with Sony XB30 Reset !

This routine is now complete. So you may now sell or gift the speaker, or pair it again with your favorite Bluetooth devices.

After resetting, the XB30 no longer automatically links with any Bluetooth device. So to restore auto joining, you manually pair it with a device. Then after that, any time that both speaker and that device have Bluetooth turned on, and are in range, pairing would automatically take place once more.

Other Sony XB30 Posts

    1. Sony XB30 Specifications
    2. Sony XB30 Power Button Not Working
    3. Sony XB30 Bluetooth Pairing Instructions
    4. How to Turn Off Sony XB30
    5. Sony XB30 Specs Watts

Related Posts to Sony XB30 Reset

    1. Sony XB20 Reset Instructions
    2. Sony SRS XB22 Reset Instructions

References

    1. Official Sony XB30 Support Page
    2. Where to Buy the Sony XB30

Revision History

    • 2023-03-22: First published.