You charge the Sony XB32 wireless speaker via the micro USB style power input port, and to get the quickest charge time and fullest recharge, use a medium current USB charger for fastest yet most cost effective results. Details follow.
Now according to the specs for this speaker, the time it takes to charge the XB32 is five (5.0) hours. This using a 5 volt, 1.5 amp, 7.5 watt charger or greater.
Furthermore, on a complete charge, the speaker can play for up to twenty-four (24) hours, thanks to its built in lithium ion battery.
But when you play it loudly, especially with thumping bass, you will indeed see much shorter playing times per recharge. We see this Bluetooth speaker die in around eight hours when we play at louder volume. So to get the longest playing time per recharge, power saving is useful. Just play it only as loudly as you need to, to hear it well throughout your listening space.
If you own this speaker over a few years, you may notice that the time it plays from a single charge shrinks as the speaker gets older. This is normal for devices like this one, that rely on lithium ion batteries.
But by deep cycling the battery now and then, you can slow this charge capacity decrease. So to exercise the XB32, run the battery fully dead and then charge it up again every three to six months.
Also, we advise that you avoid leaving the speaker connected to a charger once it reaches full charge. Right after the charging lamp goes out, unplug the speaker as soon as you can, to avoid overcharging it and aging the battery early.
Covers the JBL Go 3 Firmware Update Instructions. However, we know of no way to…
We show you here How to Factory Reset JBL Go 3 BT Speaker, to restore…
This post gives the procedure to Connect JBL Go 3 to Alexa. Since this pairing…
When the JBL Go 3 Speaker Won't Turn ON, this likely means one or more…
Explains How to Put JBL Go 3 Speaker in Pairing Mode. So first, turn on…
When the JBL Go 3 Won't Turn ON, this likely means one or more things…